| UMS Directory Expertise

Print version

Education

Ph.D. (by research), Aerospace Engineering, Royal Melbourne Institute of Technology (RMIT), 2001, Australia.

M. Eng (by research), Mechanical Engineering, Royal Melbourne Institute of Technology (RMIT), 1997, Australia.

Insinyur (Ir), Mechanical Engineering, Universitas Gadjah Mada (UGM), 1990, Indonesia.

Impact factor
3.903
0
0
9.724
1.513
0
0
1.221
1.221
2.44
0
0.578
0
1.750
0
22.906

Indexed Publications

Index	Articles
Web of Science (SCIE)	13
SCOPUS	75
	88

Completed Students

Study Level	Completed
PhD or Doctor (S3)	2
Master by Research (S2)	4
Master by Course (S2)	4
Bachelor (S1)	1
Bachelor	47
	58

Waluyo Adi Siswanto
( PhD, ROYAL MELBOURNE INSTITUTE OF TECHNOLOGY (RMIT), Australia)

Associate Professor
Email: waluyo@ums.ac.id
Faculty: Sekolah Pasca Sarjana
Programme: Magister Teknik Mesin
NIDN: 0618106503

Member (No.1001502),
Society of Automotive Engineers (SAE) - Australasia.

Senior Member (No.80338460),
International Association of Computer Science and Information Technology (IACSIT).

Member (No.101586),
International Association of Engineers (IAENG).

Member (No.1201.09.066616),
Persatuan Insinyur Indonesia.

Indexed Articles

Displaying 88 records.

Publication Year	Articles
2008	1
2009	1
2011	3
2012	7
2013	7
2014	11
2015	4
2016	7
2017	7
2018	6
2019	11
2020	12
2021	4
2022	5
2023	2
	88

No	Journal Detail	Index	IF
1	Siswanto, W.A. , Ramírez-Coronel, A.A. , Kareem, A.K. , Vini, M.H. , Daneshmand, S. (2023) Mechanical And Wear Evolution Of Hybrid Al Composites Reinforced With Graphite And Blast Furnace Particles, Surface Review and Letters, Vol: 30, 3, 1-7, ISSN:0218-625X. (Published)	Web of Science (SCIE)	1.240 2021
2	Siswanto, W.A. , Romero-Parra, R.M. , Sivaraman, R. , ... Alhassan, M.S. , Mahmoud, Z.H. (2023) The characterization of plastic behavior and mechanical properties in the gradient nanostructured copper, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Vol: -, Article in Press, 1-11, ISSN:2041-3076. (Published)	Web of Science (SCIE)	2.663 2021
3	Sergey V. Kuznetsov, Waluyo Adi Siswanto, Fairuza Musovna Sabirova, Inna Genadievna Pustokhina, Lyubov Anatolievna Melnikova, Rafina Rafkatovna Zakieva, M. Z. M. Nomani, Ferry Fadzlul Rahman, et al. (2022) Emotional artificial neural network (EANN)-based prediction model of maximum A-weighted noise pressure level, Noise Mapping, Vol: 9, 1, 1-9, ISSN:2084-879X. (Published)	SCOPUS
4	Moviyndiran Muniandy, Sukri Mustapa, Nurdin Ali, Waluyo Adi Siswanto, Azrin Hani Abdul Rashid & Mohd Idrus Mohd Masirin (2022) Effect of Fibre Treatment on Tensile Properties in Bamboo Fibre Extraction: A Review Paper, Lecture Notes in Mechanical Engineering, Vol: 2022, , 1-7, ISSN:78-981-16-9631-2. (Published)	SCOPUS
5	Riyadi, T.W.B. , Siswanto, W.A. , Zhu, X. (2022) Interfacial formation of intermetallic Ni-Al-Ti systems formed by induction heating, Frontiers in Mechanical Engineering, Vol: 8, 1005646, 1-9, ISSN:2297-3079. (Published)	SCOPUS
6	Ahmad Amirul Mukmin Yusof Yusof, Mohammad Sukri Mustapa, Ahmad Hamdan Ariffin, Mohd Rasidi Ibrahim, Mohd Idrus Mohd Masirin, Waluyo Adi Siswanto, Mutoh Yoshiharu (2022) The Effect of Bamboo Charcoal Powder on the Tensile Strength of Wood Plastic Composite, Materials Science Forum, Vol: 1075, November 2022, 79-85, ISSN:1662-9752. (Published)	SCOPUS
7	Tzu-Chia Chen, Mahyuddin KM Nasution, Abdullah Hasan Jabbar, Sarah Jawad Shoja, Waluyo Adi Siswanto, Sigiet Haryo Pranoto, Dmitry Bokov, Rustem Magizov, Yasser Fakri Mustafa, A. Surendar (2022) Effect of spatial heterogeneity on level of rejuvenation in Ni80P20 metallic glass, Chinese Physics B, Vol: 31, 9, 096401, ISSN:1674-1056. (Published)	SCOPUS
8	Sharfina MutiaSyarifah, Angzzas Sari Mohd Kassim, Ashuvila Mohd Aripin, Chee Ming Chan, Muhd Hafeez Zainulabidin, Nadiah Ishak, Waluyo Adi Siswanto (2021) Brief Dataset on produced handsheet from oil palm residue lignocellulose treated with Bacillus cereus on mechanical and physical characterization, Data in Brief, Vol: 36, June, 1-12, ISSN:Data in Brief. (Published)	SCOPUS
9	Supriyono, Hermawan, N.R.T., Riyadi, T.W.B., Siswanto, W.A., Wijianto (2021) The effect of water content on particle characterization of bamboo charcoal resulted from ball milling, Materials Science Forum, Vol: 1029, , 189–196, ISSN:1662-9752. (Published)	SCOPUS
10	Sarjito, Siswanto, W.A., Riyadi, T.W.B. (2021) Preface (editorial Materials Science Forum), Materials Science Forum, Vol: 1029, , v, ISSN:02555476. (Published)	SCOPUS
11	Riyadi, T.W.B., Setiadhi, D., Anggono, A.D., Siswanto, W.A., Al-Kayiem, H.H. (2021) Analysis of mechanical and thermal stresses due to TiN coating of Fe substrate by physical vapor deposition, Forces in Mechanics, Vol: 4, 100042, 1-14, ISSN:26663597. (Published)	SCOPUS
12	A S Darmawan, W A Siswanto, P I Purboputro, B W Febriantoko, T Sujitno, A Hamid (2020) Predicting Surface Hardness of Commercially Pure Titanium Under Plasma Nitrocarburizing Based on Experimental Data, IOP Conference Series: Materials Science and Engineering, Vol: 990, 012022, 1-6, ISSN:1757-8981. (Published)	SCOPUS
13	Supriyono, Iman Mawardi, Abdul Rohman, M Ghozali,Fajar Suryawan, Waluyo Adi Siswanto (2020) Electronic kit controller to increase a motorcycle engine's power and torque, International Journal of Emerging Trends in Engineering Research, Vol: 8, 6, 2563-2567, ISSN:2347-3983. (Published)	SCOPUS
14	Waluyo Adi Siswanto, Mohd Rasidi Ibrahim, Shaufi Soprudin, Mohammad Zulafif Rahim, C. Yee Long, Hanis Asyeera Rahman (2020) Experimental study on the cutting temperature, vibration and chip formation in machining of 316L under dry and flood process, International Journal of Emerging Trends in Engineering Research, Vol: 8, 6, 2701-2706, ISSN:2347-3983. (Published)	SCOPUS
15	Siswanto, W.A., Arun, M., Krasnopevtseva, I.V., Surendar, A., Maseleno, A. (2020) A competition between stress triaxiality and joule heating on microstructure evolution and degradation of SnAgCu solder joints, Journal of Manufacturing Processes, Vol: 54, , 221-227, ISSN:1526-6125. (Published)	Web of Science (SCIE)	4.086 2021
16	Siswanto, W.A., Krasnopevtsev, A.Y., Talarpoushti, G.F., Maseleno, A., Kuzichkin, O.R. (2020) Role of alternating current shape on microstructure and damage evolution of solder joints, Journal of Manufacturing Processes, Vol: 50, , 450-455, ISSN:1526-6125. (Published)	Web of Science (SCIE)	4.086 2021
17	Waluyo Adi Siswanto, Kirill Borodin, Zaid Hamid Mahmoud, A. Surendar, Sami Sajjadifar, Galiya Abdilova, Jun Chang (2020) Role of aging temperature on thermomechanical fatigue lifetime of solder joints in electronic systems, Soldering & Surface Mount Technology, Vol: 33, 4, 232239, ISSN:0954-0911. (Published)	Web of Science (SCIE)	1.552 2020
18	Supriyono, Yoyo Saputro, Ngafwan, Wijianto, Waluyo Adi Siswanto, Muhammad Sukri Mustapa (2020) Particle characterization of bamboo leaves charcoal resulted by ball milling, Annales de Chimie: Science des Materiaux, Vol: 44, 1, 73-77, ISSN:0151-9107. (Published)	SCOPUS
19	Darmawan A.S., Siswanto W.A., Purboputro P.I., Febriantoko B.W., Sujitno T., Hamid A (2020) Predicting Surface Hardness of Commercially Pure Titanium under Plasma Nitrocarburizing Based on Experimental Data, IOP Conference Series: Materials Science and Engineering, Vol: 990, 1, 012022, ISSN:1757-899X. (Published)	SCOPUS
20	Wahyanti, S., Anggono, A.D., Siswanto, W.A. (2020) Study of wrinkling and thinning behavior in the stamping process of top outer hatchback part on the SCGA and SPCC materials, Advances in Science, Technology and Engineering Systems, Vol: 5, 3, 241-248, ISSN:241-248. (Published)	SCOPUS
21	Prihtiantoro, D., Anggono, A.D., Siswanto, W.A. (2020) Defect investigation of sand casted aluminum cooling fan, Materials Science Forum, Vol: 991, , 30-36, ISSN:1662-9752. (Published)	SCOPUS
22	Anggono, A.D., Suwantri, Siswanto, W.A., Sedyono, J. (2020) Investigation of the intermetallic formation on wet underwater welding of aisi 4012 steel, Materials Science Forum, Vol: 991, , 10-16, ISSN:1662-9752. (Published)	SCOPUS
23	Siswanto, W.A., Riyadi, T.W.B. (2020) Preface (editorial of Materials Science Forum), Materials Science Forum, Vol: 991, , iv, ISSN:02555476. (Published)	SCOPUS
24	Surendar A., Adi Siswanto W., Alijani M., Alhaifi K., Salmani M. (2019) High-G drop effect on the creep-fatigue failure of SAC solder joints in BGA packages, Microsystem Technologies, Vol: -, , --, ISSN:9467076. (Published)	Web of Science (SCIE)	1.513 2018
25	Mohd Joharudin N.F., Abdul Latif N., Mustapa M.S., Mansor M.N., Siswanto W.A., Murugesan J., Yusof F. (2019) Effect of amorphous silica by rice husk ash on physical properties and microstructures of recycled aluminium chip AA7075, Materialwissenschaft und Werkstofftechnik, Vol: 50, 3, 283--288, ISSN:9335137. (Published)	Web of Science (SCIE)	0.556 2018
26	Siswanto W.A., Riyadi T.W.B. (2019) Preface, Materials Science Forum, Vol: 961 MSF, , , ISSN:2555476. (Published)	SCOPUS
27	Darmawan A.S., Siswanto W.A., Febriantoko B.W., Hamid A., Sujitno T. (2019) Predicting surface hardness of commercially pure titanium under ion implantation process, Materials Science Forum, Vol: 961 MSF, , 97--106, ISSN:2555476. (Published)	SCOPUS
28	Darmawan A.S., Siswanto W.A., Purboputro P.I., Anggono A.D., Masyrukan, Hamid A. (2019) Effect of increasing salinity to corrosion resistance of 5052 aluminum alloy in artificial seawater, Materials Science Forum, Vol: 961 MSF, , 107--111, ISSN:2555476. (Published)	SCOPUS
29	Rady M.H., Mahdi A.S., Mustapa M.S., Shamsudin S., Lajis M.A., Msebawi M.S., Siswanto W.A., Alimi S.A. (2019) Effect of heat treatment on tensile strength of direct recycled aluminium alloy (Aa6061), Materials Science Forum, Vol: 961 MSF, , 80--87, ISSN:2555476. (Published)	SCOPUS
30	Julianto, E., Siswanto, W.A., Effendy, M. (2019) Characteristics of temperature changes and stress of float glass under heat radiation, International Journal of Emerging Trends in Engineering Research, Vol: 7, 9, 228-233, ISSN:2347-3983. (Published)	SCOPUS
31	Supriyono, Mawardi, I., Siswanto, W.A. (2019) The development of engine control module manipulator module based on arduino to increase power and torque of motorcycle engine, International Journal of Advanced Trends in Computer Science and Engineering, Vol: 8, 6, 3135-3139, ISSN:22783091. (Published)	SCOPUS
32	Ibrahim M.N., Samian U.I., Kamarudin K.-A., Ismail A.E., Jamian S., Mohd Nor M.K., Awang M.K., Siswanto W.A. (2019) Investigation on dynamics characteristic of multilayer steel plate impacted by projectile, International Journal of Integrated Engineering, Vol: 11, 7, 129-136, ISSN:2229838X. (Published)	SCOPUS
33	Hermawan, M.V., Anggono, A.D., Siswanto, W.A., Riyadi, T.W.B. (2019) The influence of material properties to the stress distribution on piston, connecting rod and crankshaft of diesel engine, International Journal of Mechanical and Mechatronics Engineering, Vol: 19, 6, 13-26, ISSN:22272771. (Published)	SCOPUS
34	Siswanto, W.A., Martama, B.P. (2019) Stress and deflection of a concrete block in a four-point bending (FPB) test, Universal Journal of Mechanical Engineering, Vol: 7, 6, 307-317, ISSN:23323353. (Published)	SCOPUS
35	Siswanto W.A., Abdullah M.S., Darmawan A.S. (2018) Effect of humidity on the membrane vibration of musical instrument kompang, International Journal of Mechanical Engineering and Technology, Vol: 9, 6, 1233--1240, ISSN:9766340. (Published)	SCOPUS
36	Sarjito, Wijayanto A., Adi Siswanto W. (2018) Sail position and notch-tail modification to reduce the drag of a mini submarine, International Journal of Mechanical Engineering and Technology, Vol: 9, 6, 515--522, ISSN:9766340. (Published)	SCOPUS
37	Supriyono, Wijianto, Effendy M., Siswanto W.A. (2018) Elastoplastic analysis of plate with boundary element method, International Journal of Mechanical Engineering and Technology, Vol: 9, 6, 864--872, ISSN:9766340. (Published)	SCOPUS
38	Siswanto W.A., Syiddiq M. (2018) Demonstration of comparison between goat skin and X-ray film membranes on traditional musical instrument kompang, Pertanika Journal of Science and Technology, Vol: 26, 2, 585--598, ISSN:1287680. (Published)	SCOPUS
39	Sarjito, Siswanto W.A., Jamaldi A., Yao Y. (2018) Selecting nozzle arrangement of a chimney tower to reduce the temperature and to increase the entrainment mass flow, International Journal of Mechanical and Production Engineering Research and Development, Vol: 8, 6, 81--90, ISSN:22496890. (Published)	SCOPUS
40	Yusoff A.H.M., Salleh S.M., Abdullah M.E., Zaman I., Hani M.H.M., Siswanto W.A., Mahmud W.A.W. (2018) Experimental evaluation of fish feeder machine controller system, International Journal of Integrated Engineering, Vol: 10, 8, 218--222, ISSN:2229838X. (Published)	SCOPUS
41	Muhd Nor N.H., Siswanto W.A., Ismail A.E., Mustapha A., Masek A., Hassan M.F., Yunos M.Z., Abdullah M.K., Md Jalil M.A.S., Tajudin S.A.A., Khalid A., Jamian S., Mohamad F. (2017) Preface, IOP Conference Series: Materials Science and Engineering, Vol: 226, 1, --, ISSN:17578981. (Published)	SCOPUS
42	Siswanto W.A., Abdullah M.S.B. (2017) Numerical tension adjustment of x-ray membrane to represent goat skin kompang, AIP Conference Proceedings, Vol: 1831, , --, ISSN:0094243X. (Published)	SCOPUS
43	Ismail A.E., Mohd Tobi A.L., Siswanto W.A. (2017) Preface, IOP Conference Series: Materials Science and Engineering, Vol: 166, 1, --, ISSN:17578981. (Published)	SCOPUS
44	Azahari A., Siswanto W.A., Ngali M.Z., Salleh S.M., Yusup E.M. (2017) Dynamic Simulation and Analysis of Human Walking Mechanism, IOP Conference Series: Materials Science and Engineering, Vol: 166, 1, --, ISSN:17578981. (Published)	SCOPUS
45	Siswanto W.A., Yoon C.C., Salleh S.M., Ngali M.Z., Yusup E.M. (2017) Computational Modelling and Movement Analysis of Hip Joint with Muscles, IOP Conference Series: Materials Science and Engineering, Vol: 166, 1, --, ISSN:17578981. (Published)	SCOPUS
46	Firdaus M., Salleh S.M., Nawi I., Ngali Z., Siswanto W.A., Yusup E.M. (2017) Preliminary Design on Screw Press Model of Palm Oil Extraction Machine, IOP Conference Series: Materials Science and Engineering, Vol: 166, 1, --, ISSN:17578981. (Published)	SCOPUS
47	Kaharuddin M.Z., Khairu Razak S.B., Kushairi M.I., Abd Rahman M.S., An W.C., Ngali Z., Siswanto W.A., Salleh S.M., Yusup E.M. (2017) Biomechanics Analysis of Combat Sport (Silat) by Using Motion Capture System, IOP Conference Series: Materials Science and Engineering, Vol: 166, 1, --, ISSN:17578981. (Published)	SCOPUS
48	Siswanto W.A., Nagentrau M., Mohd Tobi A.L., Tamin M.N. (2016) Prediction of plastic deformation under contact condition by quasi-static and dynamic simulations using explicit finite element analysis, Journal of Mechanical Science and Technology, Vol: 30, 11, 5093--5101, ISSN:1738494X. (Published)	Web of Science (SCIE)	1.221 2018
49	Mohd Tobi A.L., Zaman I., Mustapa M.S., Siswanto W.A., Mahzan S. (2016) Case study: Techniques for material characterization of brass tensile testing fracture sample, ARPN Journal of Engineering and Applied Sciences, Vol: 11, 16, 10128--10132, ISSN:18196608. (Published)	SCOPUS
50	Farid Husaini M., Md Salleh S., Ngali Z., Siswanto W.A. (2016) Temperature decrement rate of bath tub water for ice bath therapy, ARPN Journal of Engineering and Applied Sciences, Vol: 11, 12, 7480--7484, ISSN:18196608. (Published)	SCOPUS
51	Nagentrau M., Siswanto W.A., Mohd Tobi A.L. (2016) The influence of Linear Kinematic hardening and non-linear combined isotropic-kinematic hardening plasticity model on sliding contact, International Journal of Mechanical and Mechatronics Engineering, Vol: 16, 4, 83--88, ISSN:22272771. (Published)	SCOPUS
52	Nagentrau M., Siswanto W.A., Mohd Tobi A.L. (2016) Predicting the sliding amplitude of plastic deformation in the reciprocating sliding contact, ARPN Journal of Engineering and Applied Sciences, Vol: 11, 4, 2266--2271, ISSN:18196608. (Published)	SCOPUS
53	Ngali M.Z., Ibrahim N.S.S., Md Salleh S., Siswanto W.A. (2016) Single-camera motion capture system for netball team strategic tool, ARPN Journal of Engineering and Applied Sciences, Vol: 11, 14, 8653--8657, ISSN:18196608. (Published)	SCOPUS
54	Ngali M.Z., Abdul Razak S., Daud N.A., Md Salleh S., Siswanto W.A. (2016) INLET-outlet arrangement effects on ice bath cooling system for athlete's injury recovery procedure, ARPN Journal of Engineering and Applied Sciences, Vol: 11, 18, 11198--11202, ISSN:18196608. (Published)	SCOPUS
55	Siswanto W.A., Nagentrau M., Mohd Tobi A.L. (2015) Prediction of residual stress using explicit finite element method, Journal of Mechanical Engineering and Sciences, Vol: 9, , 1556--1570, ISSN:22894659. (Published)	SCOPUS
56	Paruka P., Siswanto W.A., Maleque M.A., Shah M.K.M. (2015) Crashworthy capacity of a hybridized epoxy-glass fiber aluminum columnar tube using repeated axial resistive force, Journal of Mechanical Science and Technology, Vol: 29, 5, 1941--1953, ISSN:1738494X. (Published)	Web of Science (SCIE)	1.221 2018
57	Siswanto W.A., Nagentrau M., Mohd Tobi A.L., Tamin M.N. (2015) Contact pressure prediction comparison using implicit and explicit finite element methods and the validation with Hertzian theory, International Journal of Mechanical and Mechatronics Engineering, Vol: 15, 6, 1--8, ISSN:22272771. (Published)	SCOPUS
58	Mohsin M.L., Tobi A.L.M., Siswanto W.A., Tamin M.N. (2015) Finite element analysis of stress intensity factor of pre-cracked coated substrate under contact sliding, Proceedings of the IEEE/CPMT International Electronics Manufacturing Technology (IEMT) Symposium, Vol: 2015-June, , --, ISSN:10898190. (Published)	SCOPUS
59	Anggono A.D., Siswanto W.A. (2014) Simulation of ironing process for earring reduction in sheet metal forming, Applied Mechanics and Materials, Vol: 465-466, , 91--95, ISSN:16609336. (Published)	SCOPUS
60	Masrol S.R., Siswanto W.A. (2014) Stress concentration analysis of plate with circular hole: Elasticity theory and finite element comparison, Applied Mechanics and Materials, Vol: 465-466, , 1385--1389, ISSN:16609336. (Published)	SCOPUS
61	Rani M.Z.M., Tobi A.L.M., Ismail A.E., Siswanto W.A., Saad A.A. (2014) Investigation on the stress behaviour of coating-substrate interface under contact loading, Applied Mechanics and Materials, Vol: 465-466, , 1319--1323, ISSN:16609336. (Published)	SCOPUS
62	Ibrahim M.N., Siswanto W.A., Zaidi A.M.A. (2014) Numerical study on failure process of aluminium plate subjected to normal impact by hemispherical projectiles, Applied Mechanics and Materials, Vol: 660, , 598--602, ISSN:16609336. (Published)	SCOPUS
63	Anggono A.D., Riyadi T.W.B., Siswanto W.A. (2014) Dynamic explicit finite element code for U-bending simulation and springback prediction, Applied Mechanics and Materials, Vol: 660, , 337--341, ISSN:16609336. (Published)	SCOPUS
64	Nawi I., Siswanto W.A., Ismail A.E. (2014) A study of auto pour in sand casting process, Applied Mechanics and Materials, Vol: 660, , 74--78, ISSN:16609336. (Published)	SCOPUS
65	Ibrahim M.N., Siswanto W.A., Zaidi A.M.A. (2014) Numerical study of 2024 T3 aluminum plates subjected to impact and perforation, Journal of Mechanical Science and Technology, Vol: 28, 11, 4475--4482, ISSN:1738494X. (Published)	Web of Science (SCIE)	1.221 2018
66	Siswanto W.A., Yun S.T., Utomo W.M. (2014) Structural behavior of a ballasted small railway track under static and dynamic loadings, International Review on Modelling and Simulations, Vol: 7, 1, 59--64, ISSN:19749821. (Published)	SCOPUS
67	Siswanto W.A., Anggono A.D., Omar B., Jusoff K. (2014) An alternate method to springback compensation for sheet metal forming, Scientific World Journal, Vol: 2014, , --, ISSN:23566140. (Published)	Web of Science (SCIE)	1.219 2013
68	Siswanto W.A., Che Wahab W.M.A., Yahya M.N., Ismail A.E., Nawi I. (2014) A platform for digital reproduction sound of traditional musical instrument Kompang, Applied Mechanics and Materials, Vol: 660, , 823--827, ISSN:16609336. (Published)	SCOPUS
69	Utomo W.M., Sim S.Y., Haron Z.A., Bohari A.A., Zin N.M., Ariff R.M., Siswanto W.A. (2014) An improved DTC of an induction motor drive with neural network controller, International Journal of Mechanical and Mechatronics Engineering, Vol: 14, 2, 54--59, ISSN:22272771. (Published)	SCOPUS
70	Anggono A.D., Siswanto W.A., Omar B. (2013) Springback prediction compensation and optimization for front side member in sheet metal forming using FEM simulation, Advanced Materials Research, Vol: 789, , 436--442, ISSN:10226680. (Published)	SCOPUS
71	Darmawan A.S., Siswanto W.A., Sujitno T. (2013) Comparison of commercially pure titanium surface hardness improvement by plasma nitrocarburizing and ion implantation, Advanced Materials Research, Vol: 789, , 347--351, ISSN:10226680. (Published)	SCOPUS
72	Paruka P., Siswanto W.A. (2013) Axial impact performance of aluminium thin cylindrical tube, Applied Mechanics and Materials, Vol: 315, , 1--5, ISSN:16609336. (Published)	SCOPUS
73	Tam L., Omar B., Siswanto W.A. (2013) Review on anthropometric test dummy and computational modelling, Applied Mechanics and Materials, Vol: 315, , 640--644, ISSN:16609336. (Published)	SCOPUS
74	Ibrahim M.N., Siswanto W.A., Zaidi A.M.A. (2013) Computational issues in the simulation of high speed ballistic impact: A Review, Applied Mechanics and Materials, Vol: 315, , 762--767, ISSN:16609336. (Published)	SCOPUS
75	Darmawan A.S., Siswanto W.A., Sujitno T. (2013) The influence of plasma nitrocarburizing process temperature to commercially pure titanium surface hardness, Applied Mechanics and Materials, Vol: 315, , 700--704, ISSN:16609336. (Published)	SCOPUS
76	Darmawan A.S., Siswanto W.A., Sujitno T. (2013) Surface modification of commercially pure titanium by plasma nitrocarburizing at different temperatures and duration process, Research Journal of Applied Sciences, Engineering and Technology, Vol: 5, 4, 1351--1357, ISSN:20407459. (Published)	SCOPUS
77	Siswanto W.A., Ibrahim M.N. (2012) Computational kinematics sensitivity analysis of eccentric reciprocating slider mechanism, International Journal of Mathematical Models and Methods in Applied Sciences, Vol: 6, 3, 452--459, ISSN:19980140. (Published)	SCOPUS
78	Siswanto W.A., Tam L., Kasron M.Z. (2012) Sound characteristics and sound prediction of the traditional musical instrument the three-rattle angklung, International Journal of Acoustics and Vibrations, Vol: 17, 3, 120--126, ISSN:10275851. (Published)	Web of Science (SCIE)	0.578 2018
79	Anggono A.D., Siswanto W.A., Omar B. (2012) Algorithm development and application of spring back compensation for sheet metal forming, Research Journal of Applied Sciences, Engineering and Technology, Vol: 4, 14, 2036--2045, ISSN:20407459. (Published)	SCOPUS
80	Siswanto W.A., Darmawan A.S. (2012) Teaching finite element method of structural line elements assisted by open source FreeMat, Research Journal of Applied Sciences, Engineering and Technology, Vol: 4, 10, 1277--1286, ISSN:20407459. (Published)	SCOPUS
81	Siswanto W.A., Hua C.S. (2012) Strength analysis of human skull on high speed impact, International Review of Mechanical Engineering, Vol: 6, 7, 1508--1514, ISSN:19708734. (Published)	SCOPUS
82	Siswanto W.A., Omar B., Shukri S. (2012) Numerical investigation of hollow metal cross section profiles on Impact, Advanced Materials Research, Vol: 383-390, , 3241--3248, ISSN:10226680. (Published)	SCOPUS
83	Siswanto W.A., Sharafuddin R.Y., Paruka P. (2012) High speed Impact characteristics of plastic material based on finite element simulation, Advanced Materials Research, Vol: 383-390, , 3229--3233, ISSN:10226680. (Published)	SCOPUS
84	Anggono A.D., Siswanto W.A., Omar B. (2011) Hybrid die compensation method to accommodate springback error in sheet metal, AIP Conference Proceedings, Vol: 1383, , 1056--1063, ISSN:0094243X. (Published)	SCOPUS
85	Siswanto W.A., Ngui K. (2011) Performance of triangular and square ionic lifter systems, Australian Journal of Basic and Applied Sciences, Vol: 5, 9, 1433--1438, ISSN:19918178. (Published)	SCOPUS
86	Anggono A.D., Siswanto W.A., Omar B. (2011) Combined method of spring-forward and spring-back for die compensation acceleration, 2011 4th International Conference on Modeling, Simulation and Applied Optimization, ICMSAO 2011, Vol: , , --, ISSN: . (Published)	SCOPUS
87	Siswanto W.A., Omar B. (2009) Die surface design optimization accommodating springback assisted by an automatic surface generator, International Journal of Material Forming, Vol: 2, SUPPL. 1, 797--800, ISSN:19606206. (Published)	Web of Science (SCIE)	1.750 2018
88	Riyadi T.W.B., Siswanto W.A. (2008) The use of Abaqus for teaching the development of cavity defects in forward extrusion processes, International Journal of Mechanical Engineering Education, Vol: 36, 3, 221--224, ISSN:3064190. (Published)	SCOPUS

Books

Displaying 5 records.

No	Book Detail	Involvement
1	Sistem Layanan APS (Assisted Paper Submission) Waluyo Adi Siswanto, Wisnu Setiawan, Didit Purnomo, Aditya Saputra, Maryadi, Farizky Rahman, Yuldarrahman Rahit Iskandar (2021), ISBN:978-602-361-378-6, Muhammadiyah University Press. Language: Bahasa Indonesia purchase link	First author
2	Mekanika dan Dinamika Fluida Sarjito, Waluyo Adi Siswanto (2021), ISBN:978-602-361-432-5, Muhammadiyah University Press. Language: Bahasa Indonesia purchase link	Co-author
3	Teori dan Aplikasi Dinamika Teknik dengan Contoh dalam SMath Waluyo Adi Siswanto (2018), ISBN:9786023611287, Muhammadiyah University Press. Language: Bahasa Indonesia purchase link	First author
4	Scientific book writing using LyX a front-end of LaTeX Waluyo Adi Siswanto (2011), ISBN:9789675457418, Penerbit UTHM Malaysia. Language: English purchase link	First author
5	Principles of Engineering Dynamics : Concise Theory and Applications Waluyo Adi Siswanto (2008), ISBN:9789832963769, Penerbit UTHM Malaysia. Language: English purchase link	First author

Chapter in Book

Displaying 1 records.

No	Cover book	Chapter in Book	Involvement
1		Kata Pengantar (Waluyo Adi Siswanto) in Iptek nasional pasca Habibie ( Nur Mahmudi Isma'il, Mulyanto ) 2004, ISBN: 9796360535, Muhammadiyah University Press.	First author

Article in Proceedings

No conference proceedings records found.

Other Publications

No other publications found.

Research

Displaying 18 records.

Involvement	Involved as
Research member	12
Project leader	6

No	Project Title	Start	End	Involvement	Category	Funding
1	[FRGS Malaysia K331] Injury prediction of frontal impact safety assessment using a newly Malaysian size Hybrid III Anthropocentric Test device Finite Element	1/11/2020	31/10/2023	Research member	International (Malaysia)
2	[FRGS 1547] Correction On The Conventional Constitutive Formulation To Predict Three Dimensional Stress-state Of Deformation Behaviour In Commercial Aluminum Alloys Undergoing High Velocity Impacts	1/11/2015	31/10/2018	Research member	International (Malaysia)
3	[FRGS 1543] A New Algorithm Formulation And Biomechanics Motion Analysis Setup For Malaysia's High Performance Athletes In Individual And Team Sports	1/11/2015	31/10/2018	Research member	International (Malaysia)
4	[UTHM Short Grant U119] Development of autofeeder with pneumatic control systems to produce high glossy acrylic door panel at Taichi Tech Industry Sdn Bhd	14/10/2014	16/10/2016	Research member	International (Malaysia)
5	[FRGS 1483] Pengurangan sisa makanan menggunakan teknik pengkomposan berasaskan teeknologi hijau	1/9/2014	31/8/2016	Research member	International (Malaysia)
6	[GIPS 809] Surface hardening modelling and contact algorithm improvement for high performance finite element method in parallel computing	1/4/2015	31/3/2016	Project leader	International (Malaysia)	165,376,000
7	[GIPS U398] FE analysis of fracture and delamination on coated subtrated	1/7/2015	31/3/2016	Research member	International (Malaysia)
8	[GIPS U292] Developing A Numerical Model for X-Ray Kompang	1/5/2015	31/1/2016	Project leader	International (Malaysia)	30,770,000
9	[RACE 1441] Characterisation of failure mechanism of a coated surface using finite element simulation method for a novel coating selection tool	1/12/2013	30/11/2015	Research member	International (Malaysia)
10	[FRGS 1424] Investigation of kenaf fiber reinforced composites for automotive crash energy absorbing structures	13/12/2013	15/11/2015	Research member	International (Malaysia)
11	[FRGS 1420] A new algorithm framework of granular fertiliser boom sprayer simulation for paddy field simulation	13/12/2013	15/11/2015	Research member	International (Malaysia)
12	[FRGS 1206] Sound Characterisation of Traditional Musical Instrument Kompang to Reproduce Digital Synthesizer	1/4/2013	1/4/2015	Project leader	International (Malaysia)	246,500,000
13	[RAGS R010] Modelling of elastoplastic damage constitutive model for plastic dynamic behavior in automotive and aerospace structures	15/12/2012	15/12/2014	Research member	International (Malaysia)
14	[RAGS R011] Evaluation of novel plasticity type wear model for living prediction in aeroengine components	12/12/2012	14/12/2014	Research member	International (Malaysia)
15	[FRGS 748] A new framework of hybrid springback compensation algorithm for high precision stamping part	1/9/2010	31/8/2012	Project leader	International (Malaysia)	119,884,000
16	[ScienceFund S015] New Design Of Pure Titanium Metal On Metal Total Hip Replacement With Ion Implanted Wear Resistance Surface	1/1/2008	30/11/2010	Project leader	International (Malaysia)	490,960,000
17	[FRGS 557] Development of robust method to accommodate springback distortion in in multistage sheet metal forming	1/11/2008	31/10/2010	Research member	International (Malaysia)
18	[UTHM Short Grant 506] Influence of draw beads on the springback behavior of the benchmark problem NUMISHEET 2008	1/3/2008	30/7/2009	Project leader	International (Malaysia)	34,000,000
						1,087,490,000

Innovation

Displaying 1 records.

No	Type of Innovation and Commercialisation	Year	Description
1	Intelectual Property EC00201825526	2018	Penerimaan Mahasiswa Baru-One Day Service (PMB-ODS), Intelectual Property Product, Member, No: EC00201825526. Bana Handaga, Waluyo Adi Siswanto, Husni Thamrin, Fajar Suryawan, Gunawan Ariyanto, Arissa Aprilia Nurcahyani, Ginus Pandhu Setyawan, Eka Saputra Aji

Supervision

Displaying 59 records.

***PhD or Doctor (S3)***
No	Supervision	Student	Status
1	Co- Supervisor	Agung Setyo Darmawan Surface Treatment Numerical FEM Modelling for Biomechanics Application Universiti Tun Hussein Onn Malaysia (UTHM)	In Progress
2	Supervisor	Mohd Norihan bin Ibrahim @ Tamrin Nonlinear simulation development for blasting and impact application Universiti Tun Hussein Onn Malaysia (UTHM)	Completed 2017
3	Supervisor	Agus Dwi Anggono (HD090048) Combined Method for Die Compensation in Sheet Metal Forming Universiti Tun Hussein Onn Malaysia (UTHM)	Completed 2014

***Master by Research (S2)***
No	Supervision	Student	Status
1	Supervisor	Nagentrau A/L Muniandy (GD140086) Plastic deformation prediction on coated substrate using explicit finite element method for novel coating selection tool Universiti Tun Hussein Onn Malaysia (UTHM)	Completed 2017
2	Co- Supervisor	Mohamad Lokman bin Mohsin (HD130014) Fretting investigation on metalsurface Universiti Tun Hussein Onn Malaysia (UTHM)	Completed 2017
3	Supervisor	Muhammad Syiddiq Bin Abdullah (GD140113) Developing Numerical Model for x-ray Kompang Universiti Tun Hussein Onn Malaysia (UTHM)	Completed 2017
4	Co- Supervisor	Lina Tam (HD110119) Development Model of Finite Element Model for Malaysian Female Anthropometric Dummy Universiti Tun Hussein Onn Malaysia (UTHM)	Completed 2015

***Master by Course (S2)***
No	Supervision	Student	Status
1	Supervisor	Pebli Hardi (U100170037) Perilaku Mekanik Brazilian Disc Kaca Anil Pada Uji Statik Universitas Muhammadiyah Surakarta (UMS)	Completed 2022
2	Supervisor	Eko Julianto (U100170019) PERUBAHAN SUHU DAN TEGANGAN KACA FLOAT RADIASI PANAS TRANSIENT DALAM PENGARUH VARIASI KETEBALAN Universitas Muhammadiyah Surakarta (UMS)	Completed 2019
3	Co- Supervisor	Muhammad Vendy Hermawan (U100170020) Pengaruh karakteristik material terhadap tegangan pada pisto, batang penghubung dan proros engkol mesin diesel denga FEM Universitas Muhammadiyah Surakarta (UMS)	Completed 2019
4	Supervisor	Hairul Mubarak Bin Hassim (GD110173) Finite Element Analysis of General Three Dimensional Space Frame Universiti Tun Hussein Onn Malaysia (UTHM)	Completed 2013

***Bachelor (S1)***
No	Supervision	Student	Status
1	Supervisor	Bayu Putra Martama (D200150224) TEGANGAN DAN DEFLEKSI MATERIAL BETON BALOK PADA UJI FOUR-POINT BENDING (FPB) Universitas Muhammadiyah Surakarta (UMS)	Completed 2019

***Bachelor***
No	Supervision	Student	Status
1	Supervisor	ATHIRAH BINTI AZAHARI (CD130195) DYNAMIC SIMULATION AND ANALYSIS OF HUMAN WALKING MECHANISM	Completed 2017
2	Supervisor	AHMAD KHAIRUL KHAIR BIN MOHD YUSRI (CD130194) VERIFICATION AND COMPARISON OF IMPACT BONE CASE STUDY IN IMPACT AND FEBIO	Completed 2017
3	Supervisor	Muhammad Azhar Bin Mohd Hanas (CD120038) FINITE ELEMENT METHOD MODEL OF HUMAN FOOT FOR BIOMECHANICS RESEARCH	Completed 2016
4	Supervisor	Mohamad Akmal Bin Jamil (AD120136) Investigation of human bone material properties to the bone crack behaviour on impact by using finite element analysis	Completed 2016
5	Supervisor	Wan Muhamad Asyraf Bin Wan Mohd Bakri (AD120150) Development of computer interface simulation platform for bone injury analysis	Completed 2016
6	Supervisor	Ahmad Fuad Bin Mat Yusoff (AD120031) Finite element fixation model of human knee bone with tendon	Completed 2016
7	Supervisor	Muhammad Dinie Al-Syafiq Bin Radzuan (CD110235) Simulation of B-pillar in sheet metal forming with different blank materials	Completed 2015
8	Supervisor	Wan Muhamed Akil Bin Che Wahab (CD110378) Digital reproduction sound of kompang by using digital midi synthesizer	Completed 2015
9	Supervisor	Soh Kai Ying Finite element analysis of axisymmetric shell structure	Completed 2015
10	Supervisor	Nurul Najwa Binti Ahmad (CD11034) Boron steel tensile test simulation under preheated environment	Completed 2014
11	Supervisor	Abdul Halim Bin Rasul (Ad100056) Reproduction off Kompang Sound Using Frequency Data	Completed 2014
12	Supervisor	Muhd Hakeem Bin Ahmad Tajudin (Ad100069) Performance Analysis of Barbell Bench Press Equipment With Different Angles for Chest Workout	Completed 2014
13	Supervisor	Dayanathan A/L Balakrishnan (CD100066) Simulation of B-pillar standard benchmark for hot forming sheet metal	Completed 2013
14	Supervisor	Jearron Jackson Akat (DD090106) Sound Characteristics Assessment Of The Acoustic Guitar String	Completed 2013
15	Supervisor	Sheikh Abdul Hadi Bin Sheikh Abd Kadir Improvement Of Projectile Motion Equipment	Completed 2013
16	Supervisor	Sham Tsae Yun MODELING AND SAFETY ANALYSIS OF MALAYSIAN RAILWAY TRACK	Completed 2012
17	Supervisor	Tan Kang Teng IMPACT ANAYLSIS AND MODIFICATION OF FRONT INNER BUMPER FOR SEDAN	Completed 2012
18	Supervisor	AbdulHafedh Abdulrab Sharaf Al-Ahdal Noise Cancellation of Frequencies Produced by Band-saw Metal Cutting Machine	Completed 2012
19	Supervisor	TAN CHUN HAW INVESTIGATION OF TWO CARS HEAD ON COLLISION	Completed 2012
20	Supervisor	TUNG HENG GIAP INVESTIGATION OR REAR END CRASH ON MALAYSIAN CAR	Completed 2012
21	Supervisor	PEROWANSA PARUKA DEVELOPMENT OF IMPACT TESTING MACHINE AND SIMULATION	Completed 2012
22	Supervisor	Ling How Hua Sound Characteristics of Traditional Musical Instrument Kompang	Completed 2012
23	Supervisor	Christopher Gabriel Swyny Development of GiD to FEBio Interface for biomechanics analysis	Completed 2012
24	Supervisor	Khamarul Ashraaf Bin Arif Sound Characteristics of Kompang with X-Ray Film Membrane	Completed 2012
25	Supervisor	CHONG SZU HUA MODELLING AND SAFETY ANALYSIS OF MALAYSIAN RAILWAY TRACK	Completed 2011
26	Supervisor	Shamsir Bin Shukri Investigation of the Metal Cross Section Profiles of Front Bumper Attachment	Completed 2010
27	Supervisor	Chin Yoong Woon Development of Natural Frequency Platform by Using Finite Element Method	Completed 2010
28	Supervisor	Chan Choon Kit Development of Stress Analysis Program for Tensile Test of Plate With Hole	Completed 2010
29	Supervisor	Rodzilla Yahya Sharafuddin High Speed Impact Characteristics of Plastics	Completed 2010
30	Supervisor	CHIN CHAI YOON COMPUTATIONAL MODELING OF HIP JOINT WITH MUDCLES	Completed 2010
31	Supervisor	SITI HAMIDAH BINTI MOHAMAD HAIRI DEVELOPMENT OF MALAYSIAN FEMALE ADULT 50TH PERCENTILE CRASH DUMMY MODEL	Completed 2010
32	Supervisor	Amiruddin Faizal Bin Nekmat Dynamics response of car passenger on frontal collision	Completed 2009
33	Supervisor	Kamarul Izzadi Bin Kemarudin Development of mathematical model platform of suspension system of motorcycle	Completed 2009
34	Supervisor	Nik Aida Madiha bt N Zainal Abidin Experimental Investigation of Drawbeads Geometry to Minimise Springback in Drawing Processes	Completed 2009
35	Supervisor	Nurul Zieyana bt Mohamed Anuar Improvement of a Portable Water Filter Shell to a New Stronger Design Based on Impact Criterion	Completed 2009
36	Supervisor	Shahrul Effendy Bin Md Yazit Development of Mini Sled Impact Test System	Completed 2009
37	Supervisor	Siti Mariah Binti Mohamad Vibration Test System For Electronic Devices	Completed 2009
38	Supervisor	Nur Hasalli Binti Hj Ibrahim Development of Computational Motorcycle and Rider to Investigate Crash Behaviors on Collision	Completed 2009
39	Supervisor	Dayang Nurul Hafizawaty Bt Abang Ali Experimental Safety Investigation of Children Helmet on a Mini Sled Test	Completed 2009
40	Supervisor	Siti Khadijah Bte Mohd Borhan Numerical Simulation on Children Helmet Test	Completed 2009
41	Supervisor	Tan Kang Yao Crash Investigation of Cushion Barrier Using Finite Element Method	Completed 2009
42	Supervisor	Lina Tam Sound Characteristics of Traditional Musical Instrument Angklung	Completed 2009
43	Supervisor	Desmond Choo Wan Keong Computational Model of Cushion Barrier to Investigate the Crash Performance	Completed 2009
44	Supervisor	Jeevana Jothi A/P Ramakrisna Fatigue Vibration Monitoring using Laser Doppler For Dissimilar Joint Material	Completed 2008
45	Supervisor	Nor Assikin Bte Khamis Computational Investigation of Drawbeads Geometry to Minimise Springback in Sheet Metal Forming	Completed 2008
46	Supervisor	Annevella Anak Mathew Influence of Drawbeads on the Springback Behaviour of NUMISHEET 2008	Completed 2008
47	Supervisor	Maryani Muchtar Dynamic Analysis of Mechanical Biped Robotic System	Completed 2008

Awards

Displaying 10 results.

***Achievement Recognition***
No	Achievement Information	Category	Year
1	Dosen Berprestasi - Kategori H-indeks tertinggi pada jurnal scopus Universitas Muhammadiyah Surakarta (UMS)	University	2019
2	Anugerah PnP Cemerlang FKMP UTHM, Sem 1 Sesi 2013-2014 (Outstanding Staff) Universiti Tun Hussein Onn Malaysia (UTHM)	University	2014
3	Anugerah PnP Cemerlang FKMP UTHM, Sem 2 Sesi 2012-2013 (Outstanding Staff) Universiti Tun Hussein Onn Malaysia (UTHM)	University	2014
4	Achieving 25 documents publications in SCOPUS Universiti Tun Hussein Onn Malaysia (UTHM)	University	2014
5	Anugerah Perkhidmatan Cemerlang (Outstanding Staff) Universiti Tun Hussein Onn Malaysia (UTHM)	University	2010

***Award***
No	Achievement Information	Category	Year
1	Anugerah Buku Terbaik Kategori Sains Teknologi dan Kejuruteraan Project leader Scientific Book Writing Using LyX a Front-end of LaTeX *Hadiah Penghargaan* Universiti Tun Hussein Onn Malaysia (UTHM)	University	2012
2	Anugerah Buku Terbaik Kategori Sains Teknologi dan Kejuruteraan Project leader Principles of Engineering Dynamics Concise Theory and Applications *Hadiah Pertama* Universiti Tun Hussein Onn Malaysia (UTHM)	University	2010
3	International Invention Innovation and Technology Exhibition (ITEX2010) Project leader Graphical user interface GiD to Impact *Silver medal*	International	2010
4	Anugerah Buku Terlaris Kategori Sains Teknologi dan Kejuruteraan Project leader Principles of Engineering Dynamics Concise Theory and Applications *Hadiah Kedua* Universiti Tun Hussein Onn Malaysia (UTHM)	University	2010
5	International Invention Innovation and Technology Exhibition (ITEX2010) Project leader Computational Model of Motorcycle and Rider *Bronze medal*	International	2010

Management

Displaying 28 records

Universiti Tun Hussein Onn Malaysia (UTHM)
No	Assignment Post	Assignment Information
1	Course Coordinator	Course Coordinator BDC40303 Kinematics Mechanism, Sem 1 2016-2017, (4/9/2016 - Date 14/1/2017)
2	Course Coordinator	Course Coordinator BDC40303 Kinematics Mechanism, Sem 2 2015-2016, (22/2/2016 - Date 2/7/2016)
3	Head Research Group	Head Research Group Sports Advancement and Biomechanics Research Group (SPEAR), (1/1/2016 - Date 31/12/2016)
4	Head Sector Task FKMP	Head Sector Task FKMP Database system for Faculty Mechanical and Manufacturing Engineering, (1/1/2016 - Date 31/12/2016)
5	Course Coordinator	Course Coordinator BDC40303 Kinematics Mechanism, Sem 1 2015-2016, (6/9/2015 - Date 16/1/2016)
6	Course Coordinator	Course Coordinator BDC40303 Kinematics Mechanism, Sem 2 2014-2015, (1/2/2015 - Date 20/7/2015)
7	Course Coordinator	Course Coordinator BDC40303 Kinematics Mechanism, Sem 1 2014-2015, (1/9/2014 - Date 20/1/2015)
8	Course Coordinator	Course Coordinator BDA34003, Engineering Mathematics 4, Sem 1 2014-2015, (1/9/2014 - Date 20/1/2015)
9	Course Coordinator	Course Coordinator BDC40303 Kinematics Mechanism, Sem 2 2013-2014, (1/2/2014 - Date 10/7/2014)
10	Course Coordinator	Course Coordinator BDC40303 Kinematics Mechanism, Sem 1 2013-2014, (1/9/2013 - Date 1/1/2014)
11	Course Coordinator	Course Coordinator BDA34003 Engineering Mathematics 4, Sem 1 2013-2014, (1/9/2013 - Date 20/1/2014)
12	Course Coordinator	Course Coordinator BDC4043 Kinematics Mechanism, Sem 2 2012-2013, (22/2/2013 - Date 2/7/2013)
13	Course Coordinator	Course Coordinator BDA20103, Dynamics, Sem 2 2011-2012, (1/2/2012 - Date 20/7/2012)
14	Head of Panel	Head of Panel Department of Engineering Mechanics, Faculty of Mechanical and Manufacturing Engineering, (1/1/2012 - Date 30/12/2012)
15	Course Coordinator	Course Coordinator BDA20303, Mechanics of Machines, Sem 1 2011-2012, (1/9/2011 - Date 20/1/2012)
16	Course Coordinator	Course Coordinator BDA4033, Finite Element Method, Sem2 2010-2011, (1/2/2011 - Date 20/7/2011)
17	Course Coordinator	Course Coordinator BDA4033, Finite Element Method, Sem 1 2010-2011, (1/9/2010 - Date 20/1/2011)
18	Course Coordinator	Course Coordinator BDA4033, Finite Element Method, Sem 2 2009-2010, (1/2/2010 - Date 20/7/2010)
19	Course Coordinator	Course Coordinator BDA4033, Finite Element Method, Sem 1 2009-2010, (1/9/2009 - Date 20/1/2010)

Universitas Muhammadiyah Surakarta (UMS)
No	Assignment Post	Assignment Information
1	Kepala Biro Kerjasama dan Urusan Internasional	Kepala Biro Kerjasama dan Urusan Internasional , (1/7/2021 - Date 30/6/2025)
2	Kepala Bidang Peningkatan Mutu Publikasi Ilmiah	Kepala Bidang Peningkatan Mutu Publikasi Ilmiah , (24/4/2019 - Date 23/4/2021)
3	Wakil Rektor (Vice Rector)	Wakil Rektor (Vice Rector) Students and Alumni Division, (17/10/2005 - Date 1/11/2007)
4	Wakil Rektor (Vice Rector)	Wakil Rektor (Vice Rector) Information Technology and Quality Assurance Division, (23/3/2005 - Date 17/10/2005)
5	Dean	Dean Faculty of Engineering, (7/1/2002 - Date 7/1/2005)
6	Head of Laboratory	Head of Laboratory Computer Aided Design CATIA Laboratory, (8/1/2001 - Date 8/10/2001)

Directorate of Higher Education, Indonesian Ministry of Education
No	Assignment Post	Assignment Information
1	Director	Director Technological and Professional Skill Development Project (TPSDP) at Universitas Muhammadiyah Surakarta, (6/10/2001 - Date 6/1/2002)

Autobody Manufacturing PT New Armada, Magelang, Indonesia
No	Assignment Post	Assignment Information
1	Manager	Manager Engineering and Workshop Division, (1/11/1996 - Date 1/2/1997)
2	Manager	Manager Engineering Division, (1/5/1996 - Date 1/10/1996)

Other Assignments

Displaying 44 records

University of Malaya
No	Assignment	Description
1	Master or PhD Examiner	Master - Tayebeh Kiumarsi RGI110009 Sem 1 2014-2015 , (25/3/2015 - Date 25/3/2015)

Universiti Tun Hussein Onn Malaysia (UTHM)
No	Assignment	Description
1	Developer and maintainer	FKMP database http://fkmp.uthm.edu.my/RIDC , (1/2/2016 - Date 1/11/2017)
2	Conference Technical Committee	International Conference on Computational Dynamics in Research and Industry (CFDRI2017) Songkhla, Thailand , (3/8/2017 - Date 4/8/2017) http://cfdri.uthm.edu.my/
3	Conference Technical Committee	International Summit of Knowledge Advancements (ISKA2017) M-Suites Hotel, Johor Bahru, Malaysia , (26/7/2017 - Date 27/7/2017) http://iska2017.ucmmk.com/
4	Conference Technical Committee	International Research and Innovation Summit (IRIS2017) Melaka, Malaysia , (6/5/2017 - Date 7/5/2017) http://uhsb.uthm.edu.my/iris2017/
5	Conference Technical Committee	Colloquium on Advanced Mechanics (CAMS2016) UTHM, Malaysia , (18/12/2016 - Date 18/12/2016) http://fkmp.uthm.edu.my/cams2016/
6	Pegawai Pengiring	MAJLIS KONVOKESYEN KE.16 UNIVERSITI TUN HUSSEIN ONN MALAYSIA , (8/10/2016 - Date 10/10/2016)
7	Developer and maintainer	ICME2016 Online Submission System http://fkmp.uthm.edu.my/icme2016 , (1/2/2016 - Date 3/8/2016)
8	Conference Technical Committee	7th International Conference on Mechanical and Manufacturing Engineering (ICME2016) Jogjakarta, Indonesia , (1/8/2016 - Date 3/8/2016) http://icme.uthm.edu.my/
9	Conference Paper Reviewer	7th International conference on Mechanical and Manufacturing Engineering 2016 (ICME2016) Jogjakarta, Indonesia , (1/8/2016 - Date 3/8/2016) https://icme.uthm.edu.my/
10	Conference Technical Committee	7th International conference on Mechanical and Manufacturing Engineering 2016 (ICME2016) Jogjakarta, Indonesia , (1/8/2016 - Date 3/8/2016) https://icme.uthm.edu.my/
11	Master or PhD Examiner	Master - Mathan A/L Sambu - Sem 2 2015-2016 , (31/5/2016 - Date 31/5/2016)
12	Final Year Project 2 Panel Examiner	Sem 2 2015-2016 , (29/5/2016 - Date 30/5/2016)
13	Final Year Project 2 Panel Examiner	Sem 1 2015-2016 , (20/12/2015 - Date 22/12/2015)
14	Final Year Project 1 Panel Examiner	Sem 1 2015-2016 , (13/12/2015 - Date 15/12/2015)
15	Master or PhD Viva Chairman	Master - Mohd Khairul Zainy bin Abd Gani - Sem 1 2015-2016 , (25/10/2015 - Date 25/10/2015)
16	Conference Technical Committee	6th International conference on Mechanical and Manufacturing Engineering 2015 (ICME2015) Universiti Tun Hussein Onn Malaysia , (19/10/2015 - Date 20/10/2015) http://fkmp.uthm.edu.my/ICME2015/
17	Conference Reviewer	Malaysian Technical Universities Conference on Engineering and Technology (MUCET2015) Johor Bahru , (11/10/2015 - Date 13/10/2015) http://www.mucet.net/2015/?q=list-reviewers
18	Conference Presentation Judge	Malaysian Technical Universities Conference on Engineering and Technology (MUCET2015) Johor Bahru, Malaysia , (11/10/2015 - Date 13/10/2015) http://www.mucet.net/2015/?q=list-reviewers
19	Conference Vice Director or Vice Chairman	5th International conference on Mechanical and Manufacturing Engineering 2014 (ICME2014) Bandung, Indonesia , (29/10/2014 - Date 30/10/2014) http://icme2014.myconferences.org/content/organising-team
20	Conference Paper Reviewer	5th International conference on Mechanical and Manufacturing Engineering 2014 (ICME2014) Bandung, Indonesia , (29/10/2014 - Date 30/10/2014) http://icme2014.myconferences.org/content/editors-and-reviewers
21	Conference Technical Committee	4th International conference on Mechanical and Manufacturing Engineering 2013 (ICME2013) Bangi, Malaysia , (17/12/2013 - Date 18/12/2013) http://fkmp.uthm.edu.my/icme2013/
22	Conference Technical Committee	3th International conference on Mechanical and Manufacturing Engineering 2012 (ICME2012) UTHM Library, Malaysia , (20/12/2012 - Date 21/12/2012) http://fkmp.uthm.edu.my/icme2012
23	Workshop Trainer	Pengenalan Kepada LyX (Front End LaTeX) Bagi Penulisan Akademik, (2/11/2012 - Date 2/11/2012)
24	Master or PhD Examiner	Master - Abdlmanan S.A. Elmaryami - Sem 2 2009-2010 , (10/6/2010 - Date 10/6/2010)

Universiti Putra Malaysia (UPM)
No	Assignment	Description
1	Master or PhD Examiner	Master - Wong Choon Yap - Sem 2 2008-2009 , (10/10/2009 - Date 10/10/2009)

Universitas Muhammadiyah Surakarta (UMS)
No	Assignment	Description
1	Master or PhD Examiner	Master - Muhammad Vendy Hermawan U100170020 Sem 1 2019-2020 , (1/11/2019 - Current )
2	Conference Keynote Speaker	International Conference on Engineering and Industrial Application (ICETIA2014) Surakarta , (4/12/2014 - Date 4/12/2014) http://icetia.ums.ac.id/2014/

UMS
No	Assignment	Description
1	Workhsop Moderator	Penulisan artikel internasional , (14/10/2019 - Date 15/10/2019)
2	Workshop Trainer	Pelatihan Peningkatan Ketrampilan Dasar Teknik lnstruksional (PEKERTI), (7/8/2019 - Date 16/8/2019)

UcMM Konsortium
No	Assignment	Description
1	Conference Paper Reviewer	International Summit of Knowledge Advancements (ISKA2017) M-Suites Hotel, Johor Bahru, Malaysia , (26/7/2017 - Date 27/7/2017) http://iska2017.ucmmk.com/

SMath Studio, http://smath.info/translator/
No	Assignment	Description
1	User Interface Translator	Mathematical program with WYSIWYG editor , (1/1/2010 - Current )

Politeknik Ibrahim Sultan
No	Assignment	Description
1	Workshop Trainer	Conference Database, Johor bahru, (15/9/2014 - Date 15/9/2014)

Pertanika Journal
No	Assignment	Description
1	Journal Reviewer	Pertanika Journal of Science & Technology (JST) , (1/4/2015 - Current ) http://www.pertanika.upm.edu.my/JST.php

MEST
No	Assignment	Description
1	Conference Keynote Speaker	Mechanical Engineering Science and Technology International Conference (MEST2017) Politeknik Metro, Johor Bahru , (19/4/2007 - Date 20/4/2017) http://mest-ic.org/2017/
2	Conference Paper Reviewer	Mechanical Engineering Science and Technology International Conference (MEST2017) Politeknik Metro, Johor Bahru , (19/4/2017 - Date 20/4/2017) http://mest-ic.org/2017/

LyX Document Processor https://www.lyx.org/I18n
No	Assignment	Description
1	User Interface Translator	Bahasa Indonesia Interface , (1/1/2009 - Current )

Kingston University, London, United Kingdom
No	Assignment	Description
1	Contract Academic Staff	Collaboration UMS and Kingston Univ , (1/11/2006 - Date 30/12/2006)

International Association of Computer Science and Information Technology (IACSIT)
No	Assignment	Description
1	Journal Editor	International Journal of Materials, Mechanics and Manufacturing , (1/1/2014 - Current ) http://www.ijmmm.org/list-11-1.html

International Academy of Computer Technology
No	Assignment	Description
1	Conference Technical Committee	2015 2nd International Conference on Mechatronics, Materials and Manufacturing Paris, France , (3/8/2015 - Date 4/8/2015) http://www.icmmm.org/com.html

Impact Finite Element Program Suite
No	Assignment	Description
1	Developer and maintainer	GiD to Impact Finite Element Program Interface http://www.impact-fem.org/dev_impact_en , (15/5/2009 - Current )

ICMEAS2015
No	Assignment	Description
1	Conference Technical Committee	International Conference on Mechanical Engineering and Automation Science (ICMEAS2015) Hong Kong , (24/10/2015 - Date 25/10/2015) http://www.icmeas.org/com.php

Canadian Center of Science and Education
No	Assignment	Description
1	Journal Editor	Mechanical Engineering Research , (1/1/2012 - Current ) http://ccsenet.org/journal/index.php/mer/editor

Aeronatical and Maritime Research Laboratory (AMRL), Defence Science and Technology Office (DSTO). Dept of Defense, Australia
No	Assignment	Description
1	Structural Dynamics Engineer	Fighter Jet Ground Vibration Test , (1/6/1998 - Date 30/11/1998)

Attended Courses

Displaying 13 records.

No	Course Information	Duration
1	Pelatihan penulisan artikel intenrnasionalSiti Walidah Lantai 7 Universitas Muhammadiyah Surakarta(Meningkatkan pengetahuan penulisan artikel berindeks scopus)	14/10/2019 - 15/10/2019
2	Supervising Graduate ResearchCenter for Academic Development Universiti Putra Malaysia (UPM)(Exploring effective supervision for Master and PhD students by research)	10/7/2017 - 11/7/2017
3	Sistem Outcome Based Education (OBE)Pusat Pembangunan dan Laihan Akademik Universiti Tun Hussein Onn Malaysia(Implementing OBE in UTHM Courses)	9/4/2012 - 10/4/2012
4	Ansys Workbench - Simulation IntroductionCAD-IT Consultants CAD-IT Consultants(Basic simulation in Ansys for engineering simulations)	31/10/2011 - 2/11/2011
5	Autoform Tooling/Tryout Solution BasicNumac System Technologies Numac System Technologies(Training in using Autoform simulation engineering tool especially for tooling design)	17/8/2009 - 21/8/2009
6	Penggunaan Matlab dalam Pengajaran dan PembelajaranPusat Pembangunan Akademik Universiti Tun Hussein Onn Malaysia(Usage of Matlab to assist teaching and learning process in engineering)	28/5/2008 - 29/5/2008
7	Pelatihan TOT Kurikulum Berbasis OBE menuju akreditasi prodi internasionalLembaga Jaminan Mutu, Universitas Muhammadiyah Surakarta (UMS) Surakarta(pelatihan Kurikulum berbasis Outcome base Education (OBE))	17/6/2019 -
8	Mathcad 14 Essesntial TrainingCollabTECH Malaysia CollabTECH Malaysia(Using basic features of Mathcad for numerical calculations)	18/3/2009 -
9	Graduate Staff Supervision SeminarCenter for Graduate Studies Universiti Tun Hussein Onn Malaysia(Improving skill and knowledge in supervising graduate students)	10/12/2009 -
10	Sistem Pembelajaran Author Fasa 1Pusat Pembangunan Akademik Univrsiti Tun Hussein Onn Malaysia(Using e-learning system Author for teaching in UTHM)	25/1/2011 -
11	Learning Technologies: Now and ThenPusat Pembangunan dan Latihan Akademik Universiti Tun Hussein Onn Malaysia(Exploring current and future learning technologies )	26/8/2016 -
12	Pembelajaran Teradun (Blended Learning)Pusat Pembangunan dan Latihan Akademik Universiti Tun Hussein Onn Malaysia(Using blended learning for university courses)	21/1/2016 -
13	Pam Crash and Pam Safe TrainingMAWEA Industries Mawea Industries(Using advanced simulation tool for engineering application)	26/6/2009 -

Teaching Experience

Displaying 112 records

Employer: Universitas Muhammadiyah Surakarta (UMS)
No		Session	Course
1	Bachelor (S1)	Sem 2 2022-2023	Aerodinamika (MEN3221272)
2	Bachelor (S1)	Sem 2 2022-2023	Numerical Methods (Mechanical Engineering) (MEN3221231)
3	Master by Course (S2)	Sem 2 2022-2023	Dinamika dan Desain Rangka Kendaraan (Magister Teknik Mesin) (10110103)
4	Bachelor (S1)	Sem 1 2022-2023	Dasar Pemrograman (MEN322122)
5	Bachelor (S1)	Sem 1 2022-2023	Aerodinamika (MEN3221272)
6	Bachelor (S1)	Sem 1 2022-2023	Computer Programming (international) (MEN3221221)
7	Master by Course (S2)	Sem 1 2022-2023	Dinamika dan Desain Rangka Kendaraan (10110103)
8	Bachelor (S1)	Sem 2 2021-2022	Dasar Pemrograman Komputer (MEN40932)
9	Bachelor (S1)	Sem 2 2021-2022	Numerical Methods (International Class) (MEN40334)
10	PhD or Doctor (S3)	Sem 2 2021-2022	Academic Writing and International Publications (Pendidikan Doktor Agama Islam) (-)
11	Bachelor (S1)	Sem 1 2021-2022	Aerodinamika (MEN71843)
12	Bachelor (S1)	Sem 1 2021-2022	Dinamika Teknik (MEN50832)
13	Bachelor (S1)	Sem 1 2021-2022	Engineering Dynamics (International Class) (MEN50832)
14	Master by Course (S2)	Sem 1 2021-2022	Dinamika dan Desain Rangka Kendaraan (10110103)
15	Master by Course (S2)	Sem 1 2021-2022	Optimisasi Desain (20110403)
16	Bachelor (S1)	Sem 2 2020-2021	Dasar Pemrograman Komputer (MEN40932)
17	Bachelor (S1)	Sem 2 2020-2021	Finite Element Methods (International Class) (MEN70843)
18	Master by Course (S2)	Sem 2 2020-2021	Dinamika dan Desain Rangka Kendaraan (10110103)
19	PhD or Doctor (S3)	Sem 2 2020-2021	Academic Writing and International Publications (Pendidikan Doktor Agama Islam) (-)
20	Bachelor (S1)	Sem 1 2020-2021	Aerodynamics (International Class) (MEN71843)
21	Bachelor (S1)	Sem 1 2020-2021	Dinamika Teknik (MEN50832)
22	Master by Course (S2)	Sem 1 2020-2021	Dinamika dan Desain Rangka Kendaraan (10110103)
23	Bachelor (S1)	Sem 2 2019-2020	Dasar Pemrograman Komputer (MEN40932)
24	Bachelor (S1)	Sem 2 2019-2020	Aerodynamics (International Class) (MEN71843)
25	Bachelor (S1)	Sem 2 2018-2019	Dasar Pemgrograman Komputer (MEN40932)
26	Bachelor (S1)	Sem 2 2018-2019	Finite Element Methods (MEN70843)
27	Bachelor (S1)	Sem 2 2018-2019	Numerical Methods (MEN40334)
28	Bachelor (S1)	Sem 1 2007-2008	Finite Element Methods
29	Bachelor (S1)	Sem 1 2007-2008	Aerodynamics
30	Master by Course (S2)	Sem 1 2007-2008	Operations Management
31	Bachelor (S1)	Sem 2 2006-2007	Finite Element Methods
32	Bachelor (S1)	Sem 2 2006-2007	Aerodynamics
33	Master by Course (S2)	Sem 2 2006-2007	Operations Management
34	Bachelor (S1)	Sem 1 2006-2007	Finite Element Methods
35	Master by Course (S2)	Sem 1 2006-2007	Operations Management
36	Bachelor (S1)	Sem 2 2005-2006	Aerodynamics
37	Master by Course (S2)	Sem 2 2005-2006	Operations Management
38	Bachelor (S1)	Sem 1 2005-2006	Finite Element Methods
39	Master by Course (S2)	Sem 1 2005-2006	Operations Management
40	Bachelor (S1)	Sem 2 2004-2005	Aerodynamics
41	Master by Course (S2)	Sem 2 2004-2005	Operations Management
42	Bachelor (S1)	Sem 1 2004-2005	Engineering Dynamics
43	Bachelor (S1)	Sem 1 2004-2005	Finite Element Methods
44	Master by Course (S2)	Sem 1 2004-2005	Operations Management
45	Bachelor (S1)	Sem 2 2003-2004	Mechanical Vibrations
46	Bachelor (S1)	Sem 2 2003-2004	Aerodynamics
47	Master by Course (S2)	Sem 2 2003-2004	Operations Management
48	Bachelor (S1)	Sem 1 2003-2004	Engineering Dynamics
49	Bachelor (S1)	Sem 1 2003-2004	Finite Element Methods
50	Bachelor (S1)	Sem 2 2002-2003	Mechanical Vibrations
51	Bachelor (S1)	Sem 2 2002-2003	Aerodynamics
52	Bachelor (S1)	Sem 1 2002-2003	Engineering Dynamics
53	Bachelor (S1)	Sem 1 2002-2003	Finite Element Methods
54	Bachelor (S1)	Sem 2 2001-2002	Mechanical Vibrations
55	Bachelor (S1)	Sem 1 2001-2002	Engineering Dynamics
56	Bachelor (S1)	Sem 1 2001-2002	Finite Element Methods
57	Bachelor (S1)	Sem 1 2001-2002	Production Management
58	Bachelor (S1)	Sem 2 2000-2001	Aerodynamics
59	Bachelor (S1)	Sem 2 2000-2001	Mechanical Vibrations
60	Bachelor (S1)	Sem 1 2000-2001	Calculus 3
61	Bachelor (S1)	Sem 1 2000-2001	Engineering Dynamics

Employer: Other
No		Session	Course
1	Universitas Muhammadiyah Kalimantan Timur (UMKT) Bachelor (S1)	Sem 2 2018-2019	Dasar Pemgrograman Komputer (TME2123)
2	Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1)	Sem 2 2016-2017	Engineering Mathematics 4 (BDA34003)
3	Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1)	Sem 2 2016-2017	Finite Element Methods (BDA31003)
4	Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1)	Sem 1 2016-2017	Kinematics Mechanism (BDC40303)
5	Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1)	Sem 1 2016-2017	Engineering Mathematics 4 (BDA34003)
6	Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1)	Sem 2 2015-2016	Finite Element Methods (BDA31003)
7	Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1)	Sem 2 2015-2016	Kinematics Mechanism (BDC40303)
8	Universiti Tun Hussein Onn Malaysia (UTHM) Master by Course (S2)	Sem 2 2015-2016	Advanced Engineering Mathematics (MDC10103)
9	Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1)	Sem 1 2015-2016	Finite Element Methods (BDA31003)
10	Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1)	Sem 1 2015-2016	Kinematics Mechanism (BDC40303)
11	Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1)	Sem 3 2014-2015	Engineering Mathematics 4 (BDA34003)
12	Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1)	Sem 2 2014-2015	Kinematics Mechanism (BDC40303)
13	Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1)	Sem 2 2014-2015	Finite Element Methods (BDA31003)
14	Universiti Tun Hussein Onn Malaysia (UTHM) Master by Course (S2)	Sem 2 2014-2015	Advanced Mechanisms and Machines (MDM10704)
15	Universiti Tun Hussein Onn Malaysia (UTHM) Master by Course (S2)	Sem 1 2014-2015	Advanced Engineering Mathematics (MDC10103)
16	Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1)	Sem 1 2014-2015	Engineering Mathematics 4 (BDA34003)
17	Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1)	Sem 1 2014-2015	Kinematics Mechanism (BDC40303)
18	Universiti Tun Hussein Onn Malaysia (UTHM) Master by Course (S2)	Sem 2 2013-2014	Advanced Mechanisms and Machines (MDM10704)
19	Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1)	Sem 2 2013-2014	Kinematics Mechanism (BDC40303)
20	Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1)	Sem 1 2013-2014	Engineering Mathematics 4 (BDA34003)
21	Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1)	Sem 1 2013-2014	Kinematics Mechanism (BDC40303)
22	Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1)	Sem 1 2013-2014	Finite Element Methods (BDA40303)
23	Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1)	Sem 2 2012-2013	Engineering Mathematics 4 (BWM30603)
24	Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1)	Sem 2 2012-2013	Kinematics Mechanism (BDC4043)
25	Universiti Tun Hussein Onn Malaysia (UTHM) Master by Course (S2)	Sem 2 2012-2013	Product Lifecycle Management (MDM10904)
26	Universiti Tun Hussein Onn Malaysia (UTHM) Master by Course (S2)	Sem 2 2012-2013	Advanced Engineering Mathematics (MDC10103)
27	Universiti Tun Hussein Onn Malaysia (UTHM) Master by Course (S2)	Sem 1 2012-2013	Modelling and Simulation (MDC10203)
28	Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1)	Sem 1 2012-2013	Engineering Mathematics 4 (BWM30603)
29	Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1)	Sem 1 2012-2013	Finite Element Methods (BDA4033)
30	Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1)	Sem 2 2011-2012	Dynamics (BDA20103)
31	Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1)	Sem 1 2011-2012	Mechanics of Machines (BDA20303)
32	Universiti Tun Hussein Onn Malaysia (UTHM) Master by Course (S2)	Sem 1 2011-2012	Modelling and Simulation (MKM1803)
33	Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1)	Sem 1 2011-2012	Solid Mechanics 2 (BDA30303)
34	Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1)	Sem 1 2011-2012	Solid Mechanics 1 (BDA10402)
35	Universiti Tun Hussein Onn Malaysia (UTHM) Master by Course (S2)	Sem 1 2011-2012	Elasticity (MDM10203)
36	Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1)	Sem 3 2010-2011	Finite Element Methods (BDA4033)
37	Universiti Tun Hussein Onn Malaysia (UTHM) Master by Course (S2)	Sem 2 2010-2011	Modelling and Simulation (MDC10203)
38	Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1)	Sem 2 2010-2011	Finite Element Methods (BDA4033)
39	Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1)	Sem 2 2010-2011	Dynamics (BDA20103)
40	Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1)	Sem 1 2010-2011	Dynamics (BDA2013)
41	Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1)	Sem 1 2010-2011	Finite Element Methods (BDA4033)
42	Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1)	Sem 2 2009-2010	Noise and Vibration (BDC4013)
43	Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1)	Sem 2 2009-2010	Mechanics of Machines (BDA2033)
44	Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1)	Sem 2 2009-2010	Dynamics (BDA2013)
45	Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1)	Sem 1 2009-2010	Noise and Vibration (BDC4013)
46	Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1)	Sem 1 2009-2010	Dynamics (BDA2013)
47	Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1)	Sem 1 2009-2010	Finite Element Methods (BDA4033)
48	Universiti Tun Hussein Onn Malaysia (UTHM) Diploma	Sem 2 2008-2009	Dynamics (DDA2063)
49	Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1)	Sem 1 2008-2009	Noise and Vibration (BDC4013)
50	Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1)	Sem 1 2008-2009	Dynamics (BDA2013)
51	Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1)	Sem 2 2007-2008	Dynamics (BDA2013)

UMS Directory Expertise

Error message

Main menu

Education

Indexed Publications

Completed Students

Waluyo Adi Siswanto

Associate Professor