Enter a comma separated list of user names.
Enter a comma separated list of user names.
Enter a comma separated list of user names.
Member (No.1001502),
      Society of Automotive Engineers (SAE) - Australasia.
Senior Member (No.80338460),
      International Association of Computer Science and Information Technology (IACSIT).
Member (No.101586),
      International Association of Engineers (IAENG).

Education

Enter a comma separated list of user names.
Year awarded Qualification University Country
2001
Ph.D. (by research)
Aerospace Engineering
Royal Melbourne Institute of Technology (RMIT) Australia
1997
M. Eng (by research)
Mechanical Engineering
Royal Melbourne Institute of Technology (RMIT) Australia
1990
Insinyur (Ir)
Mechanical Engineering
Universitas Gadjah Mada (UGM) Indonesia

A. PUBLICATIONS


Indexed Articles

Displaying 83 records.
Enter a comma separated list of user names.
Publication Year Articles
2008 1
2009 1
2011 3
2012 7
2013 7
2014 11
2015 4
2016 7
2017 7
2018 6
2019 11
2020 12
2021 4
2022 2
83
Enter a comma separated list of user names.
No Journal Detail Index IF
1 Sergey V. Kuznetsov, Waluyo Adi Siswanto, Fairuza Musovna Sabirova, Inna Genadievna Pustokhina, Lyubov Anatolievna Melnikova, Rafina Rafkatovna Zakieva, M. Z. M. Nomani, Ferry Fadzlul Rahman, et al.
(2022) Emotional artificial neural network (EANN)-based prediction model of maximum A-weighted noise pressure level, Noise Mapping, Vol: 9, 1, 1-9, ISSN:2084-879X. (Published)
SCOPUS
2 Moviyndiran Muniandy, Sukri Mustapa, Nurdin Ali, Waluyo Adi Siswanto, Azrin Hani Abdul Rashid & Mohd Idrus Mohd Masirin
(2022) Effect of Fibre Treatment on Tensile Properties in Bamboo Fibre Extraction: A Review Paper, Lecture Notes in Mechanical Engineering, Vol: 2022, , 1-7, ISSN:78-981-16-9631-2. (Published)
SCOPUS
3 Sharfina MutiaSyarifah, Angzzas Sari Mohd Kassim, Ashuvila Mohd Aripin, Chee Ming Chan, Muhd Hafeez Zainulabidin, Nadiah Ishak, Waluyo Adi Siswanto
(2021) Brief Dataset on produced handsheet from oil palm residue lignocellulose treated with Bacillus cereus on mechanical and physical characterization, Data in Brief, Vol: 36, June, 1-12, ISSN:Data in Brief. (Published)
SCOPUS
4 Supriyono, Hermawan, N.R.T., Riyadi, T.W.B., Siswanto, W.A., Wijianto
(2021) The effect of water content on particle characterization of bamboo charcoal resulted from ball milling, Materials Science Forum, Vol: 1029, , 189–196, ISSN:1662-9752. (Published)
SCOPUS
5 Sarjito, Siswanto, W.A., Riyadi, T.W.B.
(2021) Preface (editorial Materials Science Forum), Materials Science Forum, Vol: 1029, , v, ISSN:02555476. (Published)
SCOPUS
6 Riyadi, T.W.B., Setiadhi, D., Anggono, A.D., Siswanto, W.A., Al-Kayiem, H.H.
(2021) Analysis of mechanical and thermal stresses due to TiN coating of Fe substrate by physical vapor deposition, Forces in Mechanics, Vol: 4, 100042, 1-14, ISSN:26663597. (Published)
SCOPUS
7 A S Darmawan, W A Siswanto, P I Purboputro, B W Febriantoko, T Sujitno, A Hamid
(2020) Predicting Surface Hardness of Commercially Pure Titanium Under Plasma Nitrocarburizing Based on Experimental Data, IOP Conference Series: Materials Science and Engineering, Vol: 990, 012022, 1-6, ISSN:1757-8981. (Published)
SCOPUS
8 Supriyono, Iman Mawardi, Abdul Rohman, M Ghozali,Fajar Suryawan, Waluyo Adi Siswanto
(2020) Electronic kit controller to increase a motorcycle engine's power and torque, International Journal of Emerging Trends in Engineering Research, Vol: 8, 6, 2563-2567, ISSN:2347-3983. (Published)
SCOPUS
9 Waluyo Adi Siswanto, Mohd Rasidi Ibrahim, Shaufi Soprudin, Mohammad Zulafif Rahim, C. Yee Long, Hanis Asyeera Rahman
(2020) Experimental study on the cutting temperature, vibration and chip formation in machining of 316L under dry and flood process, International Journal of Emerging Trends in Engineering Research, Vol: 8, 6, 2701-2706, ISSN:2347-3983. (Published)
SCOPUS
10 Siswanto, W.A., Arun, M., Krasnopevtseva, I.V., Surendar, A., Maseleno, A.
(2020) A competition between stress triaxiality and joule heating on microstructure evolution and degradation of SnAgCu solder joints, Journal of Manufacturing Processes, Vol: 54, , 221-227, ISSN:1526-6125. (Published)
Web of Science (SCIE) 4.086
2021
11 Siswanto, W.A., Krasnopevtsev, A.Y., Talarpoushti, G.F., Maseleno, A., Kuzichkin, O.R.
(2020) Role of alternating current shape on microstructure and damage evolution of solder joints, Journal of Manufacturing Processes, Vol: 50, , 450-455, ISSN:1526-6125. (Published)
Web of Science (SCIE) 4.086
2021
12 Waluyo Adi Siswanto, Kirill Borodin, Zaid Hamid Mahmoud, A. Surendar, Sami Sajjadifar, Galiya Abdilova, Jun Chang
(2020) Role of aging temperature on thermomechanical fatigue lifetime of solder joints in electronic systems, Soldering & Surface Mount Technology, Vol: 33, 4, 232239, ISSN:0954-0911. (Published)
Web of Science (SCIE) 1.552
2020
13 Supriyono, Yoyo Saputro, Ngafwan, Wijianto, Waluyo Adi Siswanto, Muhammad Sukri Mustapa
(2020) Particle characterization of bamboo leaves charcoal resulted by ball milling, Annales de Chimie: Science des Materiaux, Vol: 44, 1, 73-77, ISSN:0151-9107. (Published)
SCOPUS
14 Darmawan A.S., Siswanto W.A., Purboputro P.I., Febriantoko B.W., Sujitno T., Hamid A
(2020) Predicting Surface Hardness of Commercially Pure Titanium under Plasma Nitrocarburizing Based on Experimental Data, IOP Conference Series: Materials Science and Engineering, Vol: 990, 1, 012022, ISSN:1757-899X. (Published)
SCOPUS
15 Wahyanti, S., Anggono, A.D., Siswanto, W.A.
(2020) Study of wrinkling and thinning behavior in the stamping process of top outer hatchback part on the SCGA and SPCC materials, Advances in Science, Technology and Engineering Systems, Vol: 5, 3, 241-248, ISSN:241-248. (Published)
SCOPUS
16 Prihtiantoro, D., Anggono, A.D., Siswanto, W.A.
(2020) Defect investigation of sand casted aluminum cooling fan, Materials Science Forum, Vol: 991, , 30-36, ISSN:1662-9752. (Published)
SCOPUS
17 Anggono, A.D., Suwantri, Siswanto, W.A., Sedyono, J.
(2020) Investigation of the intermetallic formation on wet underwater welding of aisi 4012 steel, Materials Science Forum, Vol: 991, , 10-16, ISSN:1662-9752. (Published)
SCOPUS
18 Siswanto, W.A., Riyadi, T.W.B.
(2020) Preface (editorial of Materials Science Forum), Materials Science Forum, Vol: 991, , iv, ISSN:02555476. (Published)
SCOPUS
19 Surendar A., Adi Siswanto W., Alijani M., Alhaifi K., Salmani M.
(2019) High-G drop effect on the creep-fatigue failure of SAC solder joints in BGA packages, Microsystem Technologies, Vol: -, , --, ISSN:9467076. (Published)
Web of Science (SCIE) 1.513
2018
20 Mohd Joharudin N.F., Abdul Latif N., Mustapa M.S., Mansor M.N., Siswanto W.A., Murugesan J., Yusof F.
(2019) Effect of amorphous silica by rice husk ash on physical properties and microstructures of recycled aluminium chip AA7075, Materialwissenschaft und Werkstofftechnik, Vol: 50, 3, 283--288, ISSN:9335137. (Published)
Web of Science (SCIE) 0.556
2018
21 Siswanto W.A., Riyadi T.W.B.
(2019) Preface, Materials Science Forum, Vol: 961 MSF, , , ISSN:2555476. (Published)
SCOPUS
22 Darmawan A.S., Siswanto W.A., Febriantoko B.W., Hamid A., Sujitno T.
(2019) Predicting surface hardness of commercially pure titanium under ion implantation process, Materials Science Forum, Vol: 961 MSF, , 97--106, ISSN:2555476. (Published)
SCOPUS
23 Darmawan A.S., Siswanto W.A., Purboputro P.I., Anggono A.D., Masyrukan, Hamid A.
(2019) Effect of increasing salinity to corrosion resistance of 5052 aluminum alloy in artificial seawater, Materials Science Forum, Vol: 961 MSF, , 107--111, ISSN:2555476. (Published)
SCOPUS
24 Rady M.H., Mahdi A.S., Mustapa M.S., Shamsudin S., Lajis M.A., Msebawi M.S., Siswanto W.A., Alimi S.A.
(2019) Effect of heat treatment on tensile strength of direct recycled aluminium alloy (Aa6061), Materials Science Forum, Vol: 961 MSF, , 80--87, ISSN:2555476. (Published)
SCOPUS
25 Julianto, E., Siswanto, W.A., Effendy, M.
(2019) Characteristics of temperature changes and stress of float glass under heat radiation, International Journal of Emerging Trends in Engineering Research, Vol: 7, 9, 228-233, ISSN:2347-3983. (Published)
SCOPUS
26 Supriyono, Mawardi, I., Siswanto, W.A.
(2019) The development of engine control module manipulator module based on arduino to increase power and torque of motorcycle engine, International Journal of Advanced Trends in Computer Science and Engineering, Vol: 8, 6, 3135-3139, ISSN:22783091. (Published)
SCOPUS
27 Ibrahim M.N., Samian U.I., Kamarudin K.-A., Ismail A.E., Jamian S., Mohd Nor M.K., Awang M.K., Siswanto W.A.
(2019) Investigation on dynamics characteristic of multilayer steel plate impacted by projectile, International Journal of Integrated Engineering, Vol: 11, 7, 129-136, ISSN:2229838X. (Published)
SCOPUS
28 Hermawan, M.V., Anggono, A.D., Siswanto, W.A., Riyadi, T.W.B.
(2019) The influence of material properties to the stress distribution on piston, connecting rod and crankshaft of diesel engine, International Journal of Mechanical and Mechatronics Engineering, Vol: 19, 6, 13-26, ISSN:22272771. (Published)
SCOPUS
29 Siswanto, W.A., Martama, B.P.
(2019) Stress and deflection of a concrete block in a four-point bending (FPB) test, Universal Journal of Mechanical Engineering, Vol: 7, 6, 307-317, ISSN:23323353. (Published)
SCOPUS
30 Siswanto W.A., Abdullah M.S., Darmawan A.S.
(2018) Effect of humidity on the membrane vibration of musical instrument kompang, International Journal of Mechanical Engineering and Technology, Vol: 9, 6, 1233--1240, ISSN:9766340. (Published)
SCOPUS
31 Sarjito, Wijayanto A., Adi Siswanto W.
(2018) Sail position and notch-tail modification to reduce the drag of a mini submarine, International Journal of Mechanical Engineering and Technology, Vol: 9, 6, 515--522, ISSN:9766340. (Published)
SCOPUS
32 Supriyono, Wijianto, Effendy M., Siswanto W.A.
(2018) Elastoplastic analysis of plate with boundary element method, International Journal of Mechanical Engineering and Technology, Vol: 9, 6, 864--872, ISSN:9766340. (Published)
SCOPUS
33 Siswanto W.A., Syiddiq M.
(2018) Demonstration of comparison between goat skin and X-ray film membranes on traditional musical instrument kompang, Pertanika Journal of Science and Technology, Vol: 26, 2, 585--598, ISSN:1287680. (Published)
SCOPUS
34 Sarjito, Siswanto W.A., Jamaldi A., Yao Y.
(2018) Selecting nozzle arrangement of a chimney tower to reduce the temperature and to increase the entrainment mass flow, International Journal of Mechanical and Production Engineering Research and Development, Vol: 8, 6, 81--90, ISSN:22496890. (Published)
SCOPUS
35 Yusoff A.H.M., Salleh S.M., Abdullah M.E., Zaman I., Hani M.H.M., Siswanto W.A., Mahmud W.A.W.
(2018) Experimental evaluation of fish feeder machine controller system, International Journal of Integrated Engineering, Vol: 10, 8, 218--222, ISSN:2229838X. (Published)
SCOPUS
36 Muhd Nor N.H., Siswanto W.A., Ismail A.E., Mustapha A., Masek A., Hassan M.F., Yunos M.Z., Abdullah M.K., Md Jalil M.A.S., Tajudin S.A.A., Khalid A., Jamian S., Mohamad F.
(2017) Preface, IOP Conference Series: Materials Science and Engineering, Vol: 226, 1, --, ISSN:17578981. (Published)
SCOPUS
37 Siswanto W.A., Abdullah M.S.B.
(2017) Numerical tension adjustment of x-ray membrane to represent goat skin kompang, AIP Conference Proceedings, Vol: 1831, , --, ISSN:0094243X. (Published)
SCOPUS
38 Ismail A.E., Mohd Tobi A.L., Siswanto W.A.
(2017) Preface, IOP Conference Series: Materials Science and Engineering, Vol: 166, 1, --, ISSN:17578981. (Published)
SCOPUS
39 Azahari A., Siswanto W.A., Ngali M.Z., Salleh S.M., Yusup E.M.
(2017) Dynamic Simulation and Analysis of Human Walking Mechanism, IOP Conference Series: Materials Science and Engineering, Vol: 166, 1, --, ISSN:17578981. (Published)
SCOPUS
40 Siswanto W.A., Yoon C.C., Salleh S.M., Ngali M.Z., Yusup E.M.
(2017) Computational Modelling and Movement Analysis of Hip Joint with Muscles, IOP Conference Series: Materials Science and Engineering, Vol: 166, 1, --, ISSN:17578981. (Published)
SCOPUS
41 Firdaus M., Salleh S.M., Nawi I., Ngali Z., Siswanto W.A., Yusup E.M.
(2017) Preliminary Design on Screw Press Model of Palm Oil Extraction Machine, IOP Conference Series: Materials Science and Engineering, Vol: 166, 1, --, ISSN:17578981. (Published)
SCOPUS
42 Kaharuddin M.Z., Khairu Razak S.B., Kushairi M.I., Abd Rahman M.S., An W.C., Ngali Z., Siswanto W.A., Salleh S.M., Yusup E.M.
(2017) Biomechanics Analysis of Combat Sport (Silat) by Using Motion Capture System, IOP Conference Series: Materials Science and Engineering, Vol: 166, 1, --, ISSN:17578981. (Published)
SCOPUS
43 Siswanto W.A., Nagentrau M., Mohd Tobi A.L., Tamin M.N.
(2016) Prediction of plastic deformation under contact condition by quasi-static and dynamic simulations using explicit finite element analysis, Journal of Mechanical Science and Technology, Vol: 30, 11, 5093--5101, ISSN:1738494X. (Published)
Web of Science (SCIE) 1.221
2018
44 Mohd Tobi A.L., Zaman I., Mustapa M.S., Siswanto W.A., Mahzan S.
(2016) Case study: Techniques for material characterization of brass tensile testing fracture sample, ARPN Journal of Engineering and Applied Sciences, Vol: 11, 16, 10128--10132, ISSN:18196608. (Published)
SCOPUS
45 Farid Husaini M., Md Salleh S., Ngali Z., Siswanto W.A.
(2016) Temperature decrement rate of bath tub water for ice bath therapy, ARPN Journal of Engineering and Applied Sciences, Vol: 11, 12, 7480--7484, ISSN:18196608. (Published)
SCOPUS
46 Nagentrau M., Siswanto W.A., Mohd Tobi A.L.
(2016) The influence of Linear Kinematic hardening and non-linear combined isotropic-kinematic hardening plasticity model on sliding contact, International Journal of Mechanical and Mechatronics Engineering, Vol: 16, 4, 83--88, ISSN:22272771. (Published)
SCOPUS
47 Nagentrau M., Siswanto W.A., Mohd Tobi A.L.
(2016) Predicting the sliding amplitude of plastic deformation in the reciprocating sliding contact, ARPN Journal of Engineering and Applied Sciences, Vol: 11, 4, 2266--2271, ISSN:18196608. (Published)
SCOPUS
48 Ngali M.Z., Ibrahim N.S.S., Md Salleh S., Siswanto W.A.
(2016) Single-camera motion capture system for netball team strategic tool, ARPN Journal of Engineering and Applied Sciences, Vol: 11, 14, 8653--8657, ISSN:18196608. (Published)
SCOPUS
49 Ngali M.Z., Abdul Razak S., Daud N.A., Md Salleh S., Siswanto W.A.
(2016) INLET-outlet arrangement effects on ice bath cooling system for athlete's injury recovery procedure, ARPN Journal of Engineering and Applied Sciences, Vol: 11, 18, 11198--11202, ISSN:18196608. (Published)
SCOPUS
50 Siswanto W.A., Nagentrau M., Mohd Tobi A.L.
(2015) Prediction of residual stress using explicit finite element method, Journal of Mechanical Engineering and Sciences, Vol: 9, , 1556--1570, ISSN:22894659. (Published)
SCOPUS
51 Paruka P., Siswanto W.A., Maleque M.A., Shah M.K.M.
(2015) Crashworthy capacity of a hybridized epoxy-glass fiber aluminum columnar tube using repeated axial resistive force, Journal of Mechanical Science and Technology, Vol: 29, 5, 1941--1953, ISSN:1738494X. (Published)
Web of Science (SCIE) 1.221
2018
52 Siswanto W.A., Nagentrau M., Mohd Tobi A.L., Tamin M.N.
(2015) Contact pressure prediction comparison using implicit and explicit finite element methods and the validation with Hertzian theory, International Journal of Mechanical and Mechatronics Engineering, Vol: 15, 6, 1--8, ISSN:22272771. (Published)
SCOPUS
53 Mohsin M.L., Tobi A.L.M., Siswanto W.A., Tamin M.N.
(2015) Finite element analysis of stress intensity factor of pre-cracked coated substrate under contact sliding, Proceedings of the IEEE/CPMT International Electronics Manufacturing Technology (IEMT) Symposium, Vol: 2015-June, , --, ISSN:10898190. (Published)
SCOPUS
54 Anggono A.D., Siswanto W.A.
(2014) Simulation of ironing process for earring reduction in sheet metal forming, Applied Mechanics and Materials, Vol: 465-466, , 91--95, ISSN:16609336. (Published)
SCOPUS
55 Masrol S.R., Siswanto W.A.
(2014) Stress concentration analysis of plate with circular hole: Elasticity theory and finite element comparison, Applied Mechanics and Materials, Vol: 465-466, , 1385--1389, ISSN:16609336. (Published)
SCOPUS
56 Rani M.Z.M., Tobi A.L.M., Ismail A.E., Siswanto W.A., Saad A.A.
(2014) Investigation on the stress behaviour of coating-substrate interface under contact loading, Applied Mechanics and Materials, Vol: 465-466, , 1319--1323, ISSN:16609336. (Published)
SCOPUS
57 Ibrahim M.N., Siswanto W.A., Zaidi A.M.A.
(2014) Numerical study on failure process of aluminium plate subjected to normal impact by hemispherical projectiles, Applied Mechanics and Materials, Vol: 660, , 598--602, ISSN:16609336. (Published)
SCOPUS
58 Anggono A.D., Riyadi T.W.B., Siswanto W.A.
(2014) Dynamic explicit finite element code for U-bending simulation and springback prediction, Applied Mechanics and Materials, Vol: 660, , 337--341, ISSN:16609336. (Published)
SCOPUS
59 Nawi I., Siswanto W.A., Ismail A.E.
(2014) A study of auto pour in sand casting process, Applied Mechanics and Materials, Vol: 660, , 74--78, ISSN:16609336. (Published)
SCOPUS
60 Ibrahim M.N., Siswanto W.A., Zaidi A.M.A.
(2014) Numerical study of 2024 T3 aluminum plates subjected to impact and perforation, Journal of Mechanical Science and Technology, Vol: 28, 11, 4475--4482, ISSN:1738494X. (Published)
Web of Science (SCIE) 1.221
2018
61 Siswanto W.A., Yun S.T., Utomo W.M.
(2014) Structural behavior of a ballasted small railway track under static and dynamic loadings, International Review on Modelling and Simulations, Vol: 7, 1, 59--64, ISSN:19749821. (Published)
SCOPUS
62 Siswanto W.A., Anggono A.D., Omar B., Jusoff K.
(2014) An alternate method to springback compensation for sheet metal forming, Scientific World Journal, Vol: 2014, , --, ISSN:23566140. (Published)
Web of Science (SCIE) 1.219
2013
63 Siswanto W.A., Che Wahab W.M.A., Yahya M.N., Ismail A.E., Nawi I.
(2014) A platform for digital reproduction sound of traditional musical instrument Kompang, Applied Mechanics and Materials, Vol: 660, , 823--827, ISSN:16609336. (Published)
SCOPUS
64 Utomo W.M., Sim S.Y., Haron Z.A., Bohari A.A., Zin N.M., Ariff R.M., Siswanto W.A.
(2014) An improved DTC of an induction motor drive with neural network controller, International Journal of Mechanical and Mechatronics Engineering, Vol: 14, 2, 54--59, ISSN:22272771. (Published)
SCOPUS
65 Anggono A.D., Siswanto W.A., Omar B.
(2013) Springback prediction compensation and optimization for front side member in sheet metal forming using FEM simulation, Advanced Materials Research, Vol: 789, , 436--442, ISSN:10226680. (Published)
SCOPUS
66 Darmawan A.S., Siswanto W.A., Sujitno T.
(2013) Comparison of commercially pure titanium surface hardness improvement by plasma nitrocarburizing and ion implantation, Advanced Materials Research, Vol: 789, , 347--351, ISSN:10226680. (Published)
SCOPUS
67 Paruka P., Siswanto W.A.
(2013) Axial impact performance of aluminium thin cylindrical tube, Applied Mechanics and Materials, Vol: 315, , 1--5, ISSN:16609336. (Published)
SCOPUS
68 Tam L., Omar B., Siswanto W.A.
(2013) Review on anthropometric test dummy and computational modelling, Applied Mechanics and Materials, Vol: 315, , 640--644, ISSN:16609336. (Published)
SCOPUS
69 Ibrahim M.N., Siswanto W.A., Zaidi A.M.A.
(2013) Computational issues in the simulation of high speed ballistic impact: A Review, Applied Mechanics and Materials, Vol: 315, , 762--767, ISSN:16609336. (Published)
SCOPUS
70 Darmawan A.S., Siswanto W.A., Sujitno T.
(2013) The influence of plasma nitrocarburizing process temperature to commercially pure titanium surface hardness, Applied Mechanics and Materials, Vol: 315, , 700--704, ISSN:16609336. (Published)
SCOPUS
71 Darmawan A.S., Siswanto W.A., Sujitno T.
(2013) Surface modification of commercially pure titanium by plasma nitrocarburizing at different temperatures and duration process, Research Journal of Applied Sciences, Engineering and Technology, Vol: 5, 4, 1351--1357, ISSN:20407459. (Published)
SCOPUS
72 Siswanto W.A., Ibrahim M.N.
(2012) Computational kinematics sensitivity analysis of eccentric reciprocating slider mechanism, International Journal of Mathematical Models and Methods in Applied Sciences, Vol: 6, 3, 452--459, ISSN:19980140. (Published)
SCOPUS
73 Siswanto W.A., Tam L., Kasron M.Z.
(2012) Sound characteristics and sound prediction of the traditional musical instrument the three-rattle angklung, International Journal of Acoustics and Vibrations, Vol: 17, 3, 120--126, ISSN:10275851. (Published)
Web of Science (SCIE) 0.578
2018
74 Anggono A.D., Siswanto W.A., Omar B.
(2012) Algorithm development and application of spring back compensation for sheet metal forming, Research Journal of Applied Sciences, Engineering and Technology, Vol: 4, 14, 2036--2045, ISSN:20407459. (Published)
SCOPUS
75 Siswanto W.A., Darmawan A.S.
(2012) Teaching finite element method of structural line elements assisted by open source FreeMat, Research Journal of Applied Sciences, Engineering and Technology, Vol: 4, 10, 1277--1286, ISSN:20407459. (Published)
SCOPUS
76 Siswanto W.A., Hua C.S.
(2012) Strength analysis of human skull on high speed impact, International Review of Mechanical Engineering, Vol: 6, 7, 1508--1514, ISSN:19708734. (Published)
SCOPUS
77 Siswanto W.A., Omar B., Shukri S.
(2012) Numerical investigation of hollow metal cross section profiles on Impact, Advanced Materials Research, Vol: 383-390, , 3241--3248, ISSN:10226680. (Published)
SCOPUS
78 Siswanto W.A., Sharafuddin R.Y., Paruka P.
(2012) High speed Impact characteristics of plastic material based on finite element simulation, Advanced Materials Research, Vol: 383-390, , 3229--3233, ISSN:10226680. (Published)
SCOPUS
79 Anggono A.D., Siswanto W.A., Omar B.
(2011) Hybrid die compensation method to accommodate springback error in sheet metal, AIP Conference Proceedings, Vol: 1383, , 1056--1063, ISSN:0094243X. (Published)
SCOPUS
80 Siswanto W.A., Ngui K.
(2011) Performance of triangular and square ionic lifter systems, Australian Journal of Basic and Applied Sciences, Vol: 5, 9, 1433--1438, ISSN:19918178. (Published)
SCOPUS
81 Anggono A.D., Siswanto W.A., Omar B.
(2011) Combined method of spring-forward and spring-back for die compensation acceleration, 2011 4th International Conference on Modeling, Simulation and Applied Optimization, ICMSAO 2011, Vol: , , --, ISSN: . (Published)
SCOPUS
82 Siswanto W.A., Omar B.
(2009) Die surface design optimization accommodating springback assisted by an automatic surface generator, International Journal of Material Forming, Vol: 2, SUPPL. 1, 797--800, ISSN:19606206. (Published)
Web of Science (SCIE) 1.750
2018
83 Riyadi T.W.B., Siswanto W.A.
(2008) The use of Abaqus for teaching the development of cavity defects in forward extrusion processes, International Journal of Mechanical Engineering Education, Vol: 36, 3, 221--224, ISSN:3064190. (Published)
SCOPUS

Books

Displaying 5 records.
Enter a comma separated list of user names.
No Cover book Book Detail Involvement
1
Sistem Layanan APS (Assisted Paper Submission)
Waluyo Adi Siswanto, Wisnu Setiawan, Didit Purnomo, Aditya Saputra, Maryadi, Farizky Rahman, Yuldarrahman
Rahit Iskandar
(2021), ISBN:978-602-361-378-6, Muhammadiyah University Press.
Language: Bahasa Indonesia
purchase link
First author
2
Mekanika dan Dinamika Fluida
Sarjito, Waluyo Adi Siswanto
(2021), ISBN:978-602-361-432-5, Muhammadiyah University Press.
Language: Bahasa Indonesia
purchase link
Co-author
3
Teori dan Aplikasi Dinamika Teknik dengan Contoh dalam SMath
Waluyo Adi Siswanto
(2018), ISBN:9786023611287, Muhammadiyah University Press.
Language: Bahasa Indonesia
purchase link
First author
4
Scientific book writing using LyX a front-end of LaTeX
Waluyo Adi Siswanto
(2011), ISBN:9789675457418, Penerbit UTHM Malaysia.
Language: English
purchase link
First author
5
Principles of Engineering Dynamics : Concise Theory and Applications
Waluyo Adi Siswanto
(2008), ISBN:9789832963769, Penerbit UTHM Malaysia.
Language: English
purchase link
First author

Chapter in Book

Displaying 1 records.
Enter a comma separated list of user names.
No Cover book Chapter in Book Involvement
1
Kata Pengantar
(Waluyo Adi Siswanto)
in
Iptek nasional pasca Habibie
( Nur Mahmudi Isma'il, Mulyanto )
2004, ISBN: 9796360535, Muhammadiyah University Press.
First author

Article in Proceedings

Enter a comma separated list of user names.

No conference proceedings records found.

Other Publications

Enter a comma separated list of user names.

No other publications found.


B. RESEARCH


Research

Displaying 18 records.
Enter a comma separated list of user names.
Involvement Involved as
Research member 12
Project leader 6
Enter a comma separated list of user names.
No Project Title Start End Involvement Category Funding
1 [FRGS Malaysia K331]
Injury prediction of frontal impact safety assessment using a newly Malaysian size Hybrid III Anthropocentric Test device Finite Element
1/11/2020 31/10/2023 Research member International
(Malaysia)
2 [FRGS 1547]
Correction On The Conventional Constitutive Formulation To Predict Three Dimensional Stress-state Of Deformation Behaviour In Commercial Aluminum Alloys Undergoing High Velocity Impacts
1/11/2015 31/10/2018 Research member International
(Malaysia)
3 [FRGS 1543]
A New Algorithm Formulation And Biomechanics Motion Analysis Setup For Malaysia's High Performance Athletes In Individual And Team Sports
1/11/2015 31/10/2018 Research member International
(Malaysia)
4 [UTHM Short Grant U119]
Development of autofeeder with pneumatic control systems to produce high glossy acrylic door panel at Taichi Tech Industry Sdn Bhd
14/10/2014 16/10/2016 Research member International
(Malaysia)
5 [FRGS 1483]
Pengurangan sisa makanan menggunakan teknik pengkomposan berasaskan teeknologi hijau
1/9/2014 31/8/2016 Research member International
(Malaysia)
6 [GIPS 809]
Surface hardening modelling and contact algorithm improvement for high performance finite element method in parallel computing
1/4/2015 31/3/2016 Project leader International
(Malaysia)
165,376,000
7 [GIPS U398]
FE analysis of fracture and delamination on coated subtrated
1/7/2015 31/3/2016 Research member International
(Malaysia)
8 [GIPS U292]
Developing A Numerical Model for X-Ray Kompang
1/5/2015 31/1/2016 Project leader International
(Malaysia)
30,770,000
9 [RACE 1441]
Characterisation of failure mechanism of a coated surface using finite element simulation method for a novel coating selection tool
1/12/2013 30/11/2015 Research member International
(Malaysia)
10 [FRGS 1424]
Investigation of kenaf fiber reinforced composites for automotive crash energy absorbing structures
13/12/2013 15/11/2015 Research member International
(Malaysia)
11 [FRGS 1420]
A new algorithm framework of granular fertiliser boom sprayer simulation for paddy field simulation
13/12/2013 15/11/2015 Research member International
(Malaysia)
12 [FRGS 1206]
Sound Characterisation of Traditional Musical Instrument Kompang to Reproduce Digital Synthesizer
1/4/2013 1/4/2015 Project leader International
(Malaysia)
246,500,000
13 [RAGS R010]
Modelling of elastoplastic damage constitutive model for plastic dynamic behavior in automotive and aerospace structures
15/12/2012 15/12/2014 Research member International
(Malaysia)
14 [RAGS R011]
Evaluation of novel plasticity type wear model for living prediction in aeroengine components
12/12/2012 14/12/2014 Research member International
(Malaysia)
15 [FRGS 748]
A new framework of hybrid springback compensation algorithm for high precision stamping part
1/9/2010 31/8/2012 Project leader International
(Malaysia)
119,884,000
16 [ScienceFund S015]
New Design Of Pure Titanium Metal On Metal Total Hip Replacement With Ion Implanted Wear Resistance Surface
1/1/2008 30/11/2010 Project leader International
(Malaysia)
490,960,000
17 [FRGS 557]
Development of robust method to accommodate springback distortion in in multistage sheet metal forming
1/11/2008 31/10/2010 Research member International
(Malaysia)
18 [UTHM Short Grant 506]
Influence of draw beads on the springback behavior of the benchmark problem NUMISHEET 2008
1/3/2008 30/7/2009 Project leader International
(Malaysia)
34,000,000
1,087,490,000

Innovation

Displaying 1 records.
Enter a comma separated list of user names.
No Type of Innovation and Commercialisation Year Description
1 Intelectual Property
EC00201825526
2018 Penerimaan Mahasiswa Baru-One Day Service (PMB-ODS), Intelectual Property Product, Member, No: EC00201825526.
Bana Handaga, Waluyo Adi Siswanto, Husni Thamrin, Fajar Suryawan, Gunawan Ariyanto, Arissa Aprilia Nurcahyani, Ginus Pandhu Setyawan, Eka Saputra Aji

C. SUPERVISION


Supervision

Displaying 59 records.
Enter a comma separated list of user names.
PhD or Doctor (S3)
No Supervision Student Status
1 Co- Supervisor
Agung Setyo Darmawan
Surface Treatment Numerical FEM Modelling for Biomechanics Application
Universiti Tun Hussein Onn Malaysia (UTHM)
In Progress
2 Supervisor
Mohd Norihan bin Ibrahim @ Tamrin
Nonlinear simulation development for blasting and impact application
Universiti Tun Hussein Onn Malaysia (UTHM)
Completed 2017
3 Supervisor
Agus Dwi Anggono (HD090048)
Combined Method for Die Compensation in Sheet Metal Forming
Universiti Tun Hussein Onn Malaysia (UTHM)
Completed 2014
Master by Research (S2)
No Supervision Student Status
1 Supervisor
Nagentrau A/L Muniandy (GD140086)
Plastic deformation prediction on coated substrate using explicit finite element method for novel coating selection tool
Universiti Tun Hussein Onn Malaysia (UTHM)
Completed 2017
2 Co- Supervisor
Mohamad Lokman bin Mohsin (HD130014)
Fretting investigation on metalsurface
Universiti Tun Hussein Onn Malaysia (UTHM)
Completed 2017
3 Supervisor
Muhammad Syiddiq Bin Abdullah (GD140113)
Developing Numerical Model for x-ray Kompang
Universiti Tun Hussein Onn Malaysia (UTHM)
Completed 2017
4 Co- Supervisor
Lina Tam (HD110119)
Development Model of Finite Element Model for Malaysian Female Anthropometric Dummy
Universiti Tun Hussein Onn Malaysia (UTHM)
Completed 2015
Master by Course (S2)
No Supervision Student Status
1 Supervisor
Pebli Hardi (U100170037)
Perilaku Mekanik Brazilian Disc Kaca Anil Pada Uji Statik
Universitas Muhammadiyah Surakarta (UMS)
Completed 2022
2 Supervisor
Eko Julianto (U100170019)
PERUBAHAN SUHU DAN TEGANGAN KACA FLOAT RADIASI PANAS TRANSIENT DALAM PENGARUH VARIASI KETEBALAN
Universitas Muhammadiyah Surakarta (UMS)
Completed 2019
3 Co- Supervisor
Muhammad Vendy Hermawan (U100170020)
Pengaruh karakteristik material terhadap tegangan pada pisto, batang penghubung dan proros engkol mesin diesel denga FEM
Universitas Muhammadiyah Surakarta (UMS)
Completed 2019
4 Supervisor
Hairul Mubarak Bin Hassim (GD110173)
Finite Element Analysis of General Three Dimensional Space Frame
Universiti Tun Hussein Onn Malaysia (UTHM)
Completed 2013
Bachelor (S1)
No Supervision Student Status
1 Supervisor
Bayu Putra Martama (D200150224)
TEGANGAN DAN DEFLEKSI MATERIAL BETON BALOK PADA UJI FOUR-POINT BENDING (FPB)
Universitas Muhammadiyah Surakarta (UMS)
Completed 2019
Bachelor
No Supervision Student Status
1 Supervisor
ATHIRAH BINTI AZAHARI (CD130195)
DYNAMIC SIMULATION AND ANALYSIS OF HUMAN WALKING MECHANISM
Completed 2017
2 Supervisor
AHMAD KHAIRUL KHAIR BIN MOHD YUSRI (CD130194)
VERIFICATION AND COMPARISON OF IMPACT BONE CASE STUDY IN IMPACT AND FEBIO
Completed 2017
3 Supervisor
Muhammad Azhar Bin Mohd Hanas (CD120038)
FINITE ELEMENT METHOD MODEL OF HUMAN FOOT FOR BIOMECHANICS RESEARCH
Completed 2016
4 Supervisor
Mohamad Akmal Bin Jamil (AD120136)
Investigation of human bone material properties to the bone crack behaviour on impact by using finite element analysis
Completed 2016
5 Supervisor
Wan Muhamad Asyraf Bin Wan Mohd Bakri (AD120150)
Development of computer interface simulation platform for bone injury analysis
Completed 2016
6 Supervisor
Ahmad Fuad Bin Mat Yusoff (AD120031)
Finite element fixation model of human knee bone with tendon
Completed 2016
7 Supervisor
Muhammad Dinie Al-Syafiq Bin Radzuan (CD110235)
Simulation of B-pillar in sheet metal forming with different blank materials
Completed 2015
8 Supervisor
Wan Muhamed Akil Bin Che Wahab (CD110378)
Digital reproduction sound of kompang by using digital midi synthesizer
Completed 2015
9 Supervisor
Soh Kai Ying
Finite element analysis of axisymmetric shell structure
Completed 2015
10 Supervisor
Nurul Najwa Binti Ahmad (CD11034)
Boron steel tensile test simulation under preheated environment
Completed 2014
11 Supervisor
Abdul Halim Bin Rasul (Ad100056)
Reproduction off Kompang Sound Using Frequency Data
Completed 2014
12 Supervisor
Muhd Hakeem Bin Ahmad Tajudin (Ad100069)
Performance Analysis of Barbell Bench Press Equipment With Different Angles for Chest Workout
Completed 2014
13 Supervisor
Dayanathan A/L Balakrishnan (CD100066)
Simulation of B-pillar standard benchmark for hot forming sheet metal
Completed 2013
14 Supervisor
Jearron Jackson Akat (DD090106)
Sound Characteristics Assessment Of The Acoustic Guitar String
Completed 2013
15 Supervisor
Sheikh Abdul Hadi Bin Sheikh Abd Kadir
Improvement Of Projectile Motion Equipment
Completed 2013
16 Supervisor
Sham Tsae Yun
MODELING AND SAFETY ANALYSIS OF MALAYSIAN RAILWAY TRACK
Completed 2012
17 Supervisor
Tan Kang Teng
IMPACT ANAYLSIS AND MODIFICATION OF FRONT INNER BUMPER FOR SEDAN
Completed 2012
18 Supervisor
AbdulHafedh Abdulrab Sharaf Al-Ahdal
Noise Cancellation of Frequencies Produced by Band-saw Metal Cutting Machine
Completed 2012
19 Supervisor
TAN CHUN HAW
INVESTIGATION OF TWO CARS HEAD ON COLLISION
Completed 2012
20 Supervisor
TUNG HENG GIAP
INVESTIGATION OR REAR END CRASH ON MALAYSIAN CAR
Completed 2012
21 Supervisor
PEROWANSA PARUKA
DEVELOPMENT OF IMPACT TESTING MACHINE AND SIMULATION
Completed 2012
22 Supervisor
Ling How Hua
Sound Characteristics of Traditional Musical Instrument Kompang
Completed 2012
23 Supervisor
Christopher Gabriel Swyny
Development of GiD to FEBio Interface for biomechanics analysis
Completed 2012
24 Supervisor
Khamarul Ashraaf Bin Arif
Sound Characteristics of Kompang with X-Ray Film Membrane
Completed 2012
25 Supervisor
CHONG SZU HUA
MODELLING AND SAFETY ANALYSIS OF MALAYSIAN RAILWAY TRACK
Completed 2011
26 Supervisor
Shamsir Bin Shukri
Investigation of the Metal Cross Section Profiles of Front Bumper Attachment
Completed 2010
27 Supervisor
Chin Yoong Woon
Development of Natural Frequency Platform by Using Finite Element Method
Completed 2010
28 Supervisor
Chan Choon Kit
Development of Stress Analysis Program for Tensile Test of Plate With Hole
Completed 2010
29 Supervisor
Rodzilla Yahya Sharafuddin
High Speed Impact Characteristics of Plastics
Completed 2010
30 Supervisor
CHIN CHAI YOON
COMPUTATIONAL MODELING OF HIP JOINT WITH MUDCLES
Completed 2010
31 Supervisor
SITI HAMIDAH BINTI MOHAMAD HAIRI
DEVELOPMENT OF MALAYSIAN FEMALE ADULT 50TH PERCENTILE CRASH DUMMY MODEL
Completed 2010
32 Supervisor
Amiruddin Faizal Bin Nekmat
Dynamics response of car passenger on frontal collision
Completed 2009
33 Supervisor
Kamarul Izzadi Bin Kemarudin
Development of mathematical model platform of suspension system of motorcycle
Completed 2009
34 Supervisor
Nik Aida Madiha bt N Zainal Abidin
Experimental Investigation of Drawbeads Geometry to Minimise Springback in Drawing Processes
Completed 2009
35 Supervisor
Nurul Zieyana bt Mohamed Anuar
Improvement of a Portable Water Filter Shell to a New Stronger Design Based on Impact Criterion
Completed 2009
36 Supervisor
Shahrul Effendy Bin Md Yazit
Development of Mini Sled Impact Test System
Completed 2009
37 Supervisor
Siti Mariah Binti Mohamad
Vibration Test System For Electronic Devices
Completed 2009
38 Supervisor
Nur Hasalli Binti Hj Ibrahim
Development of Computational Motorcycle and Rider to Investigate Crash Behaviors on Collision
Completed 2009
39 Supervisor
Dayang Nurul Hafizawaty Bt Abang Ali
Experimental Safety Investigation of Children Helmet on a Mini Sled Test
Completed 2009
40 Supervisor
Siti Khadijah Bte Mohd Borhan
Numerical Simulation on Children Helmet Test
Completed 2009
41 Supervisor
Tan Kang Yao
Crash Investigation of Cushion Barrier Using Finite Element Method
Completed 2009
42 Supervisor
Lina Tam
Sound Characteristics of Traditional Musical Instrument Angklung
Completed 2009
43 Supervisor
Desmond Choo Wan Keong
Computational Model of Cushion Barrier to Investigate the Crash Performance
Completed 2009
44 Supervisor
Jeevana Jothi A/P Ramakrisna
Fatigue Vibration Monitoring using Laser Doppler For Dissimilar Joint Material
Completed 2008
45 Supervisor
Nor Assikin Bte Khamis
Computational Investigation of Drawbeads Geometry to Minimise Springback in Sheet Metal Forming
Completed 2008
46 Supervisor
Annevella Anak Mathew
Influence of Drawbeads on the Springback Behaviour of NUMISHEET 2008
Completed 2008
47 Supervisor
Maryani Muchtar
Dynamic Analysis of Mechanical Biped Robotic System
Completed 2008

D. COMMUNITY AND PROFESSIONAL SERVICES


-- (Empty) The database for community and professional services is not available yet --

 


E. AWARDS


Awards

Displaying 10 results.
Enter a comma separated list of user names.
Achievement Recognition
No Achievement Information Category Year
1 Dosen Berprestasi - Kategori H-indeks tertinggi pada jurnal scopus
Universitas Muhammadiyah Surakarta (UMS)
University 2019
2 Anugerah PnP Cemerlang FKMP UTHM, Sem 1 Sesi 2013-2014 (Outstanding Staff)
Universiti Tun Hussein Onn Malaysia (UTHM)
University 2014
3 Anugerah PnP Cemerlang FKMP UTHM, Sem 2 Sesi 2012-2013 (Outstanding Staff)
Universiti Tun Hussein Onn Malaysia (UTHM)
University 2014
4 Achieving 25 documents publications in SCOPUS
Universiti Tun Hussein Onn Malaysia (UTHM)
University 2014
5 Anugerah Perkhidmatan Cemerlang (Outstanding Staff)
Universiti Tun Hussein Onn Malaysia (UTHM)
University 2010
Award
No Achievement Information Category Year
1 Anugerah Buku Terbaik Kategori Sains Teknologi dan Kejuruteraan
Project leader Scientific Book Writing Using LyX a Front-end of LaTeX
Hadiah Penghargaan
Universiti Tun Hussein Onn Malaysia (UTHM)
University 2012
2 Anugerah Buku Terbaik Kategori Sains Teknologi dan Kejuruteraan
Project leader Principles of Engineering Dynamics Concise Theory and Applications
Hadiah Pertama
Universiti Tun Hussein Onn Malaysia (UTHM)
University 2010
3 International Invention Innovation and Technology Exhibition (ITEX2010)
Project leader Graphical user interface GiD to Impact
Silver medal
International 2010
4 Anugerah Buku Terlaris Kategori Sains Teknologi dan Kejuruteraan
Project leader Principles of Engineering Dynamics Concise Theory and Applications
Hadiah Kedua
Universiti Tun Hussein Onn Malaysia (UTHM)
University 2010
5 International Invention Innovation and Technology Exhibition (ITEX2010)
Project leader Computational Model of Motorcycle and Rider
Bronze medal
International 2010

F. WORKING EXPERIENCE


Management

Displaying 28 records
Enter a comma separated list of user names.
Universiti Tun Hussein Onn Malaysia (UTHM)
No Assignment Post Assignment Information
1 Course Coordinator Course Coordinator BDC40303 Kinematics Mechanism, Sem 1 2016-2017,
(4/9/2016 - Date 14/1/2017)
2 Course Coordinator Course Coordinator BDC40303 Kinematics Mechanism, Sem 2 2015-2016,
(22/2/2016 - Date 2/7/2016)
3 Head Research Group Head Research Group Sports Advancement and Biomechanics Research Group (SPEAR),
(1/1/2016 - Date 31/12/2016)
4 Head Sector Task FKMP Head Sector Task FKMP Database system for Faculty Mechanical and Manufacturing Engineering,
(1/1/2016 - Date 31/12/2016)
5 Course Coordinator Course Coordinator BDC40303 Kinematics Mechanism, Sem 1 2015-2016,
(6/9/2015 - Date 16/1/2016)
6 Course Coordinator Course Coordinator BDC40303 Kinematics Mechanism, Sem 2 2014-2015,
(1/2/2015 - Date 20/7/2015)
7 Course Coordinator Course Coordinator BDC40303 Kinematics Mechanism, Sem 1 2014-2015,
(1/9/2014 - Date 20/1/2015)
8 Course Coordinator Course Coordinator BDA34003, Engineering Mathematics 4, Sem 1 2014-2015,
(1/9/2014 - Date 20/1/2015)
9 Course Coordinator Course Coordinator BDC40303 Kinematics Mechanism, Sem 2 2013-2014,
(1/2/2014 - Date 10/7/2014)
10 Course Coordinator Course Coordinator BDC40303 Kinematics Mechanism, Sem 1 2013-2014,
(1/9/2013 - Date 1/1/2014)
11 Course Coordinator Course Coordinator BDA34003 Engineering Mathematics 4, Sem 1 2013-2014,
(1/9/2013 - Date 20/1/2014)
12 Course Coordinator Course Coordinator BDC4043 Kinematics Mechanism, Sem 2 2012-2013,
(22/2/2013 - Date 2/7/2013)
13 Course Coordinator Course Coordinator BDA20103, Dynamics, Sem 2 2011-2012,
(1/2/2012 - Date 20/7/2012)
14 Head of Panel Head of Panel Department of Engineering Mechanics, Faculty of Mechanical and Manufacturing Engineering,
(1/1/2012 - Date 30/12/2012)
15 Course Coordinator Course Coordinator BDA20303, Mechanics of Machines, Sem 1 2011-2012,
(1/9/2011 - Date 20/1/2012)
16 Course Coordinator Course Coordinator BDA4033, Finite Element Method, Sem2 2010-2011,
(1/2/2011 - Date 20/7/2011)
17 Course Coordinator Course Coordinator BDA4033, Finite Element Method, Sem 1 2010-2011,
(1/9/2010 - Date 20/1/2011)
18 Course Coordinator Course Coordinator BDA4033, Finite Element Method, Sem 2 2009-2010,
(1/2/2010 - Date 20/7/2010)
19 Course Coordinator Course Coordinator BDA4033, Finite Element Method, Sem 1 2009-2010,
(1/9/2009 - Date 20/1/2010)
Universitas Muhammadiyah Surakarta (UMS)
No Assignment Post Assignment Information
1 Kepala Biro Kerjasama dan Urusan Internasional Kepala Biro Kerjasama dan Urusan Internasional ,
(1/7/2021 - Date 30/6/2025)
2 Kepala Bidang Peningkatan Mutu Publikasi Ilmiah Kepala Bidang Peningkatan Mutu Publikasi Ilmiah ,
(24/4/2019 - Date 23/4/2021)
3 Wakil Rektor (Vice Rector) Wakil Rektor (Vice Rector) Students and Alumni Division,
(17/10/2005 - Date 1/11/2007)
4 Wakil Rektor (Vice Rector) Wakil Rektor (Vice Rector) Information Technology and Quality Assurance Division,
(23/3/2005 - Date 17/10/2005)
5 Dean Dean Faculty of Engineering,
(7/1/2002 - Date 7/1/2005)
6 Head of Laboratory Head of Laboratory Computer Aided Design CATIA Laboratory,
(8/1/2001 - Date 8/10/2001)
Directorate of Higher Education, Indonesian Ministry of Education
No Assignment Post Assignment Information
1 Director Director Technological and Professional Skill Development Project (TPSDP) at Universitas Muhammadiyah Surakarta,
(6/10/2001 - Date 6/1/2002)
Autobody Manufacturing PT New Armada, Magelang, Indonesia
No Assignment Post Assignment Information
1 Manager Manager Engineering and Workshop Division,
(1/11/1996 - Date 1/2/1997)
2 Manager Manager Engineering Division,
(1/5/1996 - Date 1/10/1996)

Other Assignments

Displaying 44 records
Enter a comma separated list of user names.
University of Malaya
No Assignment Description
1 Master or PhD Examiner Master - Tayebeh Kiumarsi RGI110009 Sem 1 2014-2015 ,
(25/3/2015 - Date 25/3/2015)
Universiti Tun Hussein Onn Malaysia (UTHM)
No Assignment Description
1 Developer and maintainer FKMP database http://fkmp.uthm.edu.my/RIDC ,
(1/2/2016 - Date 1/11/2017)
2 Conference Technical Committee International Conference on Computational Dynamics in Research and Industry (CFDRI2017) Songkhla, Thailand ,
(3/8/2017 - Date 4/8/2017)
3 Conference Technical Committee International Summit of Knowledge Advancements (ISKA2017) M-Suites Hotel, Johor Bahru, Malaysia ,
(26/7/2017 - Date 27/7/2017)
4 Conference Technical Committee International Research and Innovation Summit (IRIS2017) Melaka, Malaysia ,
(6/5/2017 - Date 7/5/2017)
5 Conference Technical Committee Colloquium on Advanced Mechanics (CAMS2016) UTHM, Malaysia ,
(18/12/2016 - Date 18/12/2016)
6 Pegawai Pengiring MAJLIS KONVOKESYEN KE.16 UNIVERSITI TUN HUSSEIN ONN MALAYSIA ,
(8/10/2016 - Date 10/10/2016)
7 Developer and maintainer ICME2016 Online Submission System http://fkmp.uthm.edu.my/icme2016 ,
(1/2/2016 - Date 3/8/2016)
8 Conference Technical Committee 7th International Conference on Mechanical and Manufacturing Engineering (ICME2016) Jogjakarta, Indonesia ,
(1/8/2016 - Date 3/8/2016)
9 Conference Paper Reviewer 7th International conference on Mechanical and Manufacturing Engineering 2016 (ICME2016) Jogjakarta, Indonesia ,
(1/8/2016 - Date 3/8/2016)
10 Conference Technical Committee 7th International conference on Mechanical and Manufacturing Engineering 2016 (ICME2016) Jogjakarta, Indonesia ,
(1/8/2016 - Date 3/8/2016)
11 Master or PhD Examiner Master - Mathan A/L Sambu - Sem 2 2015-2016 ,
(31/5/2016 - Date 31/5/2016)
12 Final Year Project 2 Panel Examiner Sem 2 2015-2016 ,
(29/5/2016 - Date 30/5/2016)
13 Final Year Project 2 Panel Examiner Sem 1 2015-2016 ,
(20/12/2015 - Date 22/12/2015)
14 Final Year Project 1 Panel Examiner Sem 1 2015-2016 ,
(13/12/2015 - Date 15/12/2015)
15 Master or PhD Viva Chairman Master - Mohd Khairul Zainy bin Abd Gani - Sem 1 2015-2016 ,
(25/10/2015 - Date 25/10/2015)
16 Conference Technical Committee 6th International conference on Mechanical and Manufacturing Engineering 2015 (ICME2015) Universiti Tun Hussein Onn Malaysia ,
(19/10/2015 - Date 20/10/2015)
17 Conference Reviewer Malaysian Technical Universities Conference on Engineering and Technology (MUCET2015) Johor Bahru ,
(11/10/2015 - Date 13/10/2015)
18 Conference Presentation Judge Malaysian Technical Universities Conference on Engineering and Technology (MUCET2015) Johor Bahru, Malaysia ,
(11/10/2015 - Date 13/10/2015)
19 Conference Vice Director or Vice Chairman 5th International conference on Mechanical and Manufacturing Engineering 2014 (ICME2014) Bandung, Indonesia ,
(29/10/2014 - Date 30/10/2014)
20 Conference Paper Reviewer 5th International conference on Mechanical and Manufacturing Engineering 2014 (ICME2014) Bandung, Indonesia ,
(29/10/2014 - Date 30/10/2014)
21 Conference Technical Committee 4th International conference on Mechanical and Manufacturing Engineering 2013 (ICME2013) Bangi, Malaysia ,
(17/12/2013 - Date 18/12/2013)
22 Conference Technical Committee 3th International conference on Mechanical and Manufacturing Engineering 2012 (ICME2012) UTHM Library, Malaysia ,
(20/12/2012 - Date 21/12/2012)
23 Workshop Trainer Pengenalan Kepada LyX (Front End LaTeX) Bagi Penulisan Akademik,
(2/11/2012 - Date 2/11/2012)
24 Master or PhD Examiner Master - Abdlmanan S.A. Elmaryami - Sem 2 2009-2010 ,
(10/6/2010 - Date 10/6/2010)
Universiti Putra Malaysia (UPM)
No Assignment Description
1 Master or PhD Examiner Master - Wong Choon Yap - Sem 2 2008-2009 ,
(10/10/2009 - Date 10/10/2009)
Universitas Muhammadiyah Surakarta (UMS)
No Assignment Description
1 Master or PhD Examiner Master - Muhammad Vendy Hermawan U100170020 Sem 1 2019-2020 ,
(1/11/2019 - Current )
2 Conference Keynote Speaker International Conference on Engineering and Industrial Application (ICETIA2014) Surakarta ,
(4/12/2014 - Date 4/12/2014)
UMS
No Assignment Description
1 Workhsop Moderator Penulisan artikel internasional ,
(14/10/2019 - Date 15/10/2019)
2 Workshop Trainer Pelatihan Peningkatan Ketrampilan Dasar Teknik lnstruksional (PEKERTI),
(7/8/2019 - Date 16/8/2019)
UcMM Konsortium
No Assignment Description
1 Conference Paper Reviewer International Summit of Knowledge Advancements (ISKA2017) M-Suites Hotel, Johor Bahru, Malaysia ,
(26/7/2017 - Date 27/7/2017)
SMath Studio, http://smath.info/translator/
No Assignment Description
1 User Interface Translator Mathematical program with WYSIWYG editor ,
(1/1/2010 - Current )
Politeknik Ibrahim Sultan
No Assignment Description
1 Workshop Trainer Conference Database, Johor bahru,
(15/9/2014 - Date 15/9/2014)
Pertanika Journal
No Assignment Description
1 Journal Reviewer Pertanika Journal of Science & Technology (JST) ,
(1/4/2015 - Current )
MEST
No Assignment Description
1 Conference Keynote Speaker Mechanical Engineering Science and Technology International Conference (MEST2017) Politeknik Metro, Johor Bahru ,
(19/4/2007 - Date 20/4/2017)
2 Conference Paper Reviewer Mechanical Engineering Science and Technology International Conference (MEST2017) Politeknik Metro, Johor Bahru ,
(19/4/2017 - Date 20/4/2017)
LyX Document Processor https://www.lyx.org/I18n
No Assignment Description
1 User Interface Translator Bahasa Indonesia Interface ,
(1/1/2009 - Current )
Kingston University, London, United Kingdom
No Assignment Description
1 Contract Academic Staff Collaboration UMS and Kingston Univ ,
(1/11/2006 - Date 30/12/2006)
International Association of Computer Science and Information Technology (IACSIT)
No Assignment Description
1 Journal Editor International Journal of Materials, Mechanics and Manufacturing ,
(1/1/2014 - Current )
International Academy of Computer Technology
No Assignment Description
1 Conference Technical Committee 2015 2nd International Conference on Mechatronics, Materials and Manufacturing Paris, France ,
(3/8/2015 - Date 4/8/2015)
Impact Finite Element Program Suite
No Assignment Description
1 Developer and maintainer GiD to Impact Finite Element Program Interface http://www.impact-fem.org/dev_impact_en ,
(15/5/2009 - Current )
ICMEAS2015
No Assignment Description
1 Conference Technical Committee International Conference on Mechanical Engineering and Automation Science (ICMEAS2015) Hong Kong ,
(24/10/2015 - Date 25/10/2015)
Canadian Center of Science and Education
No Assignment Description
1 Journal Editor Mechanical Engineering Research ,
(1/1/2012 - Current )
Aeronatical and Maritime Research Laboratory (AMRL), Defence Science and Technology Office (DSTO). Dept of Defense, Australia
No Assignment Description
1 Structural Dynamics Engineer Fighter Jet Ground Vibration Test ,
(1/6/1998 - Date 30/11/1998)

G. TEACHING EXPERIENCE


Teaching Experience

Displaying 105 records
Enter a comma separated list of user names.
Employer: Universitas Muhammadiyah Surakarta (UMS)
No Session Course
1 Bachelor (S1) Sem 2 2021-2022
Dasar Pemrograman Komputer (MEN40932)
2 Bachelor (S1) Sem 2 2021-2022
Numerical Methods (International Class) (MEN40334)
3 PhD or Doctor (S3) Sem 2 2021-2022
Academic Writing and International Publications (Pendidikan Doktor Agama Islam) (-)
4 Bachelor (S1) Sem 1 2021-2022
Aerodinamika (MEN71843)
5 Bachelor (S1) Sem 1 2021-2022
Dinamika Teknik (MEN50832)
6 Bachelor (S1) Sem 1 2021-2022
Engineering Dynamics (International Class) (MEN50832)
7 Master by Course (S2) Sem 1 2021-2022
Dinamika dan Desain Rangka Kendaraan (10110103)
8 Master by Course (S2) Sem 1 2021-2022
Optimisasi Desain (20110403)
9 Bachelor (S1) Sem 2 2020-2021
Dasar Pemrograman Komputer (MEN40932)
10 Bachelor (S1) Sem 2 2020-2021
Finite Element Methods (International Class) (MEN70843)
11 Master by Course (S2) Sem 2 2020-2021
Dinamika dan Desain Rangka Kendaraan (10110103)
12 PhD or Doctor (S3) Sem 2 2020-2021
Academic Writing and International Publications (Pendidikan Doktor Agama Islam) (-)
13 Bachelor (S1) Sem 1 2020-2021
Aerodynamics (International Class) (MEN71843)
14 Bachelor (S1) Sem 1 2020-2021
Dinamika Teknik (MEN50832)
15 Master by Course (S2) Sem 1 2020-2021
Dinamika dan Desain Rangka Kendaraan (10110103)
16 Bachelor (S1) Sem 2 2019-2020
Dasar Pemrograman Komputer (MEN40932)
17 Bachelor (S1) Sem 2 2019-2020
Aerodynamics (International Class) (MEN71843)
18 Bachelor (S1) Sem 2 2018-2019
Dasar Pemgrograman Komputer (MEN40932)
19 Bachelor (S1) Sem 2 2018-2019
Finite Element Methods (MEN70843)
20 Bachelor (S1) Sem 2 2018-2019
Numerical Methods (MEN40334)
21 Bachelor (S1) Sem 1 2007-2008
Finite Element Methods
22 Bachelor (S1) Sem 1 2007-2008
Aerodynamics
23 Master by Course (S2) Sem 1 2007-2008
Operations Management
24 Bachelor (S1) Sem 2 2006-2007
Finite Element Methods
25 Bachelor (S1) Sem 2 2006-2007
Aerodynamics
26 Master by Course (S2) Sem 2 2006-2007
Operations Management
27 Bachelor (S1) Sem 1 2006-2007
Finite Element Methods
28 Master by Course (S2) Sem 1 2006-2007
Operations Management
29 Bachelor (S1) Sem 2 2005-2006
Aerodynamics
30 Master by Course (S2) Sem 2 2005-2006
Operations Management
31 Bachelor (S1) Sem 1 2005-2006
Finite Element Methods
32 Master by Course (S2) Sem 1 2005-2006
Operations Management
33 Bachelor (S1) Sem 2 2004-2005
Aerodynamics
34 Master by Course (S2) Sem 2 2004-2005
Operations Management
35 Bachelor (S1) Sem 1 2004-2005
Engineering Dynamics
36 Bachelor (S1) Sem 1 2004-2005
Finite Element Methods
37 Master by Course (S2) Sem 1 2004-2005
Operations Management
38 Bachelor (S1) Sem 2 2003-2004
Mechanical Vibrations
39 Bachelor (S1) Sem 2 2003-2004
Aerodynamics
40 Master by Course (S2) Sem 2 2003-2004
Operations Management
41 Bachelor (S1) Sem 1 2003-2004
Engineering Dynamics
42 Bachelor (S1) Sem 1 2003-2004
Finite Element Methods
43 Bachelor (S1) Sem 2 2002-2003
Mechanical Vibrations
44 Bachelor (S1) Sem 2 2002-2003
Aerodynamics
45 Bachelor (S1) Sem 1 2002-2003
Engineering Dynamics
46 Bachelor (S1) Sem 1 2002-2003
Finite Element Methods
47 Bachelor (S1) Sem 2 2001-2002
Mechanical Vibrations
48 Bachelor (S1) Sem 1 2001-2002
Engineering Dynamics
49 Bachelor (S1) Sem 1 2001-2002
Finite Element Methods
50 Bachelor (S1) Sem 1 2001-2002
Production Management
51 Bachelor (S1) Sem 2 2000-2001
Aerodynamics
52 Bachelor (S1) Sem 2 2000-2001
Mechanical Vibrations
53 Bachelor (S1) Sem 1 2000-2001
Calculus 3
54 Bachelor (S1) Sem 1 2000-2001
Engineering Dynamics
Employer: Other
No Session Course
1 Universitas Muhammadiyah Kalimantan Timur (UMKT) Bachelor (S1) Sem 2 2018-2019
Dasar Pemgrograman Komputer (TME2123)
2 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1) Sem 2 2016-2017
Engineering Mathematics 4 (BDA34003)
3 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1) Sem 2 2016-2017
Finite Element Methods (BDA31003)
4 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1) Sem 1 2016-2017
Kinematics Mechanism (BDC40303)
5 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1) Sem 1 2016-2017
Engineering Mathematics 4 (BDA34003)
6 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1) Sem 2 2015-2016
Finite Element Methods (BDA31003)
7 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1) Sem 2 2015-2016
Kinematics Mechanism (BDC40303)
8 Universiti Tun Hussein Onn Malaysia (UTHM) Master by Course (S2) Sem 2 2015-2016
Advanced Engineering Mathematics (MDC10103)
9 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1) Sem 1 2015-2016
Finite Element Methods (BDA31003)
10 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1) Sem 1 2015-2016
Kinematics Mechanism (BDC40303)
11 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1) Sem 3 2014-2015
Engineering Mathematics 4 (BDA34003)
12 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1) Sem 2 2014-2015
Kinematics Mechanism (BDC40303)
13 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1) Sem 2 2014-2015
Finite Element Methods (BDA31003)
14 Universiti Tun Hussein Onn Malaysia (UTHM) Master by Course (S2) Sem 2 2014-2015
Advanced Mechanisms and Machines (MDM10704)
15 Universiti Tun Hussein Onn Malaysia (UTHM) Master by Course (S2) Sem 1 2014-2015
Advanced Engineering Mathematics (MDC10103)
16 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1) Sem 1 2014-2015
Engineering Mathematics 4 (BDA34003)
17 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1) Sem 1 2014-2015
Kinematics Mechanism (BDC40303)
18 Universiti Tun Hussein Onn Malaysia (UTHM) Master by Course (S2) Sem 2 2013-2014
Advanced Mechanisms and Machines (MDM10704)
19 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1) Sem 2 2013-2014
Kinematics Mechanism (BDC40303)
20 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1) Sem 1 2013-2014
Engineering Mathematics 4 (BDA34003)
21 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1) Sem 1 2013-2014
Kinematics Mechanism (BDC40303)
22 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1) Sem 1 2013-2014
Finite Element Methods (BDA40303)
23 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1) Sem 2 2012-2013
Engineering Mathematics 4 (BWM30603)
24 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1) Sem 2 2012-2013
Kinematics Mechanism (BDC4043)
25 Universiti Tun Hussein Onn Malaysia (UTHM) Master by Course (S2) Sem 2 2012-2013
Product Lifecycle Management (MDM10904)
26 Universiti Tun Hussein Onn Malaysia (UTHM) Master by Course (S2) Sem 2 2012-2013
Advanced Engineering Mathematics (MDC10103)
27 Universiti Tun Hussein Onn Malaysia (UTHM) Master by Course (S2) Sem 1 2012-2013
Modelling and Simulation (MDC10203)
28 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1) Sem 1 2012-2013
Engineering Mathematics 4 (BWM30603)
29 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1) Sem 1 2012-2013
Finite Element Methods (BDA4033)
30 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1) Sem 2 2011-2012
Dynamics (BDA20103)
31 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1) Sem 1 2011-2012
Mechanics of Machines (BDA20303)
32 Universiti Tun Hussein Onn Malaysia (UTHM) Master by Course (S2) Sem 1 2011-2012
Modelling and Simulation (MKM1803)
33 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1) Sem 1 2011-2012
Solid Mechanics 2 (BDA30303)
34 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1) Sem 1 2011-2012
Solid Mechanics 1 (BDA10402)
35 Universiti Tun Hussein Onn Malaysia (UTHM) Master by Course (S2) Sem 1 2011-2012
Elasticity (MDM10203)
36 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1) Sem 3 2010-2011
Finite Element Methods (BDA4033)
37 Universiti Tun Hussein Onn Malaysia (UTHM) Master by Course (S2) Sem 2 2010-2011
Modelling and Simulation (MDC10203)
38 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1) Sem 2 2010-2011
Finite Element Methods (BDA4033)
39 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1) Sem 2 2010-2011
Dynamics (BDA20103)
40 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1) Sem 1 2010-2011
Dynamics (BDA2013)
41 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1) Sem 1 2010-2011
Finite Element Methods (BDA4033)
42 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1) Sem 2 2009-2010
Noise and Vibration (BDC4013)
43 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1) Sem 2 2009-2010
Mechanics of Machines (BDA2033)
44 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1) Sem 2 2009-2010
Dynamics (BDA2013)
45 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1) Sem 1 2009-2010
Noise and Vibration (BDC4013)
46 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1) Sem 1 2009-2010
Dynamics (BDA2013)
47 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1) Sem 1 2009-2010
Finite Element Methods (BDA4033)
48 Universiti Tun Hussein Onn Malaysia (UTHM) Diploma Sem 2 2008-2009
Dynamics (DDA2063)
49 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1) Sem 1 2008-2009
Noise and Vibration (BDC4013)
50 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1) Sem 1 2008-2009
Dynamics (BDA2013)
51 Universiti Tun Hussein Onn Malaysia (UTHM) Bachelor (S1) Sem 2 2007-2008
Dynamics (BDA2013)

H. ATTENDED COURSES


Attended Courses

Displaying 13 records.
Enter a comma separated list of user names.
No Course Information Duration
1
Pelatihan penulisan artikel intenrnasionalSiti Walidah Lantai 7
Universitas Muhammadiyah Surakarta(Meningkatkan pengetahuan penulisan artikel berindeks scopus)
14/10/2019 - 15/10/2019
2
Supervising Graduate ResearchCenter for Academic Development
Universiti Putra Malaysia (UPM)(Exploring effective supervision for Master and PhD students by research)
10/7/2017 - 11/7/2017
3
Sistem Outcome Based Education (OBE)Pusat Pembangunan dan Laihan Akademik
Universiti Tun Hussein Onn Malaysia(Implementing OBE in UTHM Courses)
9/4/2012 - 10/4/2012
4
Ansys Workbench - Simulation IntroductionCAD-IT Consultants
CAD-IT Consultants(Basic simulation in Ansys for engineering simulations)
31/10/2011 - 2/11/2011
5
Autoform Tooling/Tryout Solution BasicNumac System Technologies
Numac System Technologies(Training in using Autoform simulation engineering tool especially for tooling design)
17/8/2009 - 21/8/2009
6
Penggunaan Matlab dalam Pengajaran dan PembelajaranPusat Pembangunan Akademik
Universiti Tun Hussein Onn Malaysia(Usage of Matlab to assist teaching and learning process in engineering)
28/5/2008 - 29/5/2008
7
Pelatihan TOT Kurikulum Berbasis OBE menuju akreditasi prodi internasionalLembaga Jaminan Mutu, Universitas Muhammadiyah Surakarta (UMS)
Surakarta(pelatihan Kurikulum berbasis Outcome base Education (OBE))
17/6/2019 -
8
Mathcad 14 Essesntial TrainingCollabTECH Malaysia
CollabTECH Malaysia(Using basic features of Mathcad for numerical calculations)
18/3/2009 -
9
Graduate Staff Supervision SeminarCenter for Graduate Studies
Universiti Tun Hussein Onn Malaysia(Improving skill and knowledge in supervising graduate students)
10/12/2009 -
10
Sistem Pembelajaran Author Fasa 1Pusat Pembangunan Akademik
Univrsiti Tun Hussein Onn Malaysia(Using e-learning system Author for teaching in UTHM)
25/1/2011 -
11
Learning Technologies: Now and ThenPusat Pembangunan dan Latihan Akademik
Universiti Tun Hussein Onn Malaysia(Exploring current and future learning technologies )
26/8/2016 -
12
Pembelajaran Teradun (Blended Learning)Pusat Pembangunan dan Latihan Akademik
Universiti Tun Hussein Onn Malaysia(Using blended learning for university courses)
21/1/2016 -
13
Pam Crash and Pam Safe TrainingMAWEA Industries
Mawea Industries(Using advanced simulation tool for engineering application)
26/6/2009 -