 |
Marwan Effendy( PhD, Kingston University, United Kingdom)ProfessorEmail: me213@ums.ac.idFaculty: Sekolah Pasca Sarjana Programme: Magister Teknik Mesin NIDN: 0612107101 
|
Member (No.250268),
International Association of Engineers (IAENG).
International Association of Engineers (IAENG).
Member (No.71111624790),
International Association of Advanced Materials (IAAM).
International Association of Advanced Materials (IAAM).
Member (No.2103220006),
Ikatan Ilmuwan Indonesia Internasional (I4).
Ikatan Ilmuwan Indonesia Internasional (I4).
Member (No.1125.52.052478),
The Institution of Engineers Indonesia (PII).
The Institution of Engineers Indonesia (PII).
Indexed Articles
Displaying 37 records.| Publication Year | Articles |
|---|---|
| 2012 | 1 |
| 2013 | 3 |
| 2014 | 2 |
| 2016 | 1 |
| 2017 | 2 |
| 2018 | 6 |
| 2019 | 13 |
| 2020 | 1 |
| 2021 | 2 |
| 2022 | 2 |
| 2023 | 4 |
| 37 |
| No | Journal Detail | Index | IF |
|---|---|---|---|
| 1 |
Hussain H Al-Kayiem, Marwan Effendy, Tri WB Riyadi, Jundika C Kurnia, Akelesh Morganadus (2023) Influence of Life Green Wall and Roof Shedding on the Internal Thermal Condition of Buildings: Case Study in Malaysia, ICPER 2020, Vol: 10, , 35-45, ISSN:978-981-19-1939-8. (Published) |
SCOPUS |
|
| 2 |
Ngafwan Ngafwan, Marwan Effendy, Gatot Supangkat Samidjo, Gusti Ketut Puja, I.N.G. Wardana (2023) The role of Carica papaya latex bio-catalyst and thermal shock in water on synthesizing rice husk, Arabian Journal of Chemistry, Vol: 16, 4, 104568, ISSN:1878-5352. (Published) |
Web of Science (SCIE) |
6.212 2022 |
| 3 |
Al-Kayiem, H.H., Mohammed, M.N., Kelly, K., Riyadi,T.W.B., Effendy, M. (2023) Experimental Assessment and Development of Thermal Comfort Model for Implication in Tropical Climate, International Journal of Computational Methods and Experimental Measurements, Vol: 11, 1, 35-43, ISSN:2046-0554. (Published) |
SCOPUS |
|
| 4 |
Rozaq, F., Wirawan, W.A., Barokah, Effendy, M., Nurtanto, M. (2023) An analysis of temperature treatment of biodiesel fuel on engine performance, AIP Conference Proceedings, Vol: 2671, 1, 020027 , ISSN:1551-7616. (Published) |
SCOPUS |
|
| 5 |
Tri Widodo Besar Riyadi, Bagus Radiant Utomo, Marwan Effendy, Agung Tri Wijayanta, Hussain H. Al-Kayiem (2022) Effect of thermal cycling with various heating rates on the performance of thermoelectric modules, International Journal of Thermal Sciences, Vol: 178, 8, 107601, ISSN:1290-0729. (Published) |
Web of Science (SCIE) |
3.744 2021 |
| 6 |
Nurfa Anisa, Djarot B. Darmadi, Sugiono Sugiono, Ngafwan Ngafwan, Marwan Effendy, I.N.G. Wardana (2022) The Role of Carica Papaya Latex Bio-Catalyst in Recycling of Used Fibre Pulp, Arabian Journal of Chemistry, Vol: 15, 7, 103952, ISSN:1878-5352. (Published) |
Web of Science (SCIE) |
5.165 2021 |
| 7 |
Marwan Effendy, Arif Surono, Eqwar Saputra, Nurmuntaha Agung Nugraha (2021) Performance and smoke opacity of compression-ignition engine using used-waste oil, Case Studies in Thermal Engineering, Vol: 26, 101063, 1-7, ISSN:2214-157X. (Published) |
Web of Science (SCIE) |
4.724 2021 |
| 8 |
Ratna Kartikasari, Marwan Effendy (2021) Surface characterization of Fe–10Al–25Mn alloy for biomaterial applications, Journal of Materials Research and Technology, Vol: 15, August, 409-415, ISSN:2238-7854. (Published) |
Web of Science (SCIE) |
5.039 2021 |
| 9 |
Hussain H. Al-Kayiem, Kelly Koh, Tri W. B. Riyadi and Marwan Effendy (2020) A Comparative Review on Greenery Ecosystems and Their Impacts on Sustainability of Building Environment , Sustainability, Vol: 12, 20, 8529, ISSN:2071-1050. (Published) |
Web of Science (SCIE) |
2.576 2020 |
| 10 |
Subroto, Effendy M. (2019) Optimization of centrifugal pump performance with various blade number, AIP Conference Proceedings, Vol: 2114, 20016, --, ISSN:0094243X. (Published) |
SCOPUS |
|
| 11 |
Effendy M., Yao Y., Yao J., Marchant D.R. (2019) Pin-fin shape and orientation effects on wall heat transfer predictions of gas turbine blade, AIP Conference Proceedings, Vol: 2114, 20008, --, ISSN:0094243X. (Published) |
SCOPUS |
|
| 12 |
Effendy M., Yao Y., Sugati D., Tjahjono T. (2019) Numerical study of pin-fin cooling on gas turbine blades, AIP Conference Proceedings, Vol: 2114, 60022, --, ISSN:0094243X. (Published) |
SCOPUS |
|
| 13 |
Junaidi, Suparno J., Ardiansyah D.H., Effendy M., Jamari (2019) Improvement of wear resistant of railway wheel by using graphite in various speeds based on disc-on-disc contact system, AIP Conference Proceedings, Vol: 2114, 40005, --, ISSN:0094243X. (Published) |
SCOPUS |
|
| 14 |
Suparno J., Halim D.A., Junaidi, Setiawan A., Effendy M., Jamari J. (2019) Graphite as dry lubricant to reduce rail wheels wear level, Materials Science Forum, Vol: 961 MSF, , 126--133, ISSN:2555476. (Published) |
SCOPUS |
|
| 15 |
Effendy, M., Yao Y.F., Yao J,. D.R.Marchant (2019) Detached eddy simulation of blade trailing-edge cutback cooling performance at various ejection slot angles, International Journal of Heat and Fluid Flow, Vol: 80, December 2019, 1, ISSN:0142-727X. (Published) |
Web of Science (SCIE) |
2.789 2021 |
| 16 |
Gunawan, L. V., Effendy, M. (2019) Pengaruh Campuran Bioetanol Biji Durian pada Bahan Bakar Pertalite terhadap Performa Mesin dan Emisi Gas Buang Kendaraan, Rotasi, Vol: 21, 2, 76-81, ISSN:2406-9620. (Published) |
Other index |
|
| 17 |
Jamaldi, J., Effendy, M. (2019) Kajian Numerik Efektifitas Film Cooling pada Sudu Turbin Gas, Rotasi, Vol: 21, 1, 10-15, ISSN:2406-9620. (Published) |
Other index |
|
| 18 |
Effendy, M. (2019) Unjuk Kerja Separator Gas Liquid Cylindical Cyclone (GLCC Metering Loop), Rotasi, Vol: 21, 2, 68-75, ISSN:2406-9620. (Published) |
Other index |
|
| 19 |
Effendy, M., Muchlisin, M. (2019) Studi Eksperimental dan Simulasi Numerik Karakteristik Aerodinamika Airfoil NACA 4412, Rotasi, Vol: 21, 3, 147-154, ISSN:2406-9620. (Published) |
Other index |
|
| 20 |
Julianto, E., Siswanto, W.A., Effendy, M (2019) Characteristics of temperature changes and stress of float glass under heat radiation, International Journal of Emerging Trends in Engineering Research, Vol: 7, 9, 228-233, ISSN:2347-3983. (Published) |
SCOPUS |
|
| 21 |
Sunaryo, Marwan Efendy, Sarjito, and Nur Saifullah Kamarrudin (2019) Pyrolysis of Plastic Waste as an Alternative Fuels in Spark Ignition Engine , International Journal of Emerging Trends in Engineering Research, 2019,, Vol: 7, 11, 201-211, ISSN:2347 - 3983. (Published) |
SCOPUS |
|
| 22 |
Sarjito, I Prasetyo, T W B Riyadi, A D Anggono and M Effendy (2019) An effect of different spark plug used and additional ethanol on engine performance and exhaust gas emission, Materials Science and Engineering, Vol: 674, 1, 1-9, ISSN:0000-0000. (Published) |
SCOPUS |
|
| 23 |
Sugati D., Effendy M. (2018) RANS study of the liquid jet gas ejector, AIP Conference Proceedings, Vol: 1983, 20006, --, ISSN:0094243X. (Published) |
SCOPUS |
|
| 24 |
Sugati D., Indarto, Purnomo, Sutrisno, Effendy M., Yawara E. (2018) Identification performance of the liquid-gas ejector using static pressure distribution, AIP Conference Proceedings, Vol: 1983, 20013, --, ISSN:0094243X. (Published) |
SCOPUS |
|
| 25 |
Supriyono, Effendy M., Wijianto (2018) Domain discretization in dealing with domain integral in material nonlinearity plate bending analysis with boundary element method, AIP Conference Proceedings, Vol: 1977, 20055, --, ISSN:0094243X. (Published) |
SCOPUS |
|
| 26 |
Supriyono, Wijianto, Effendy M., Siswanto W.A. (2018) Elastoplastic analysis of plate with boundary element method, International Journal of Mechanical Engineering and Technology, Vol: 9, 6, 864--872, ISSN:9766340. (Published) |
SCOPUS |
|
| 27 |
Riyadi T.W.B., Yulianto Y.H., Effendy M., Sarjito, Zheng Z., Ping T.L. (2018) Evaluation on a digitized CAD model of 3D scanner used in reverse engineering, Proceedings - 12th SEATUC Symposium, SEATUC 2018, Vol: , 8788885, --, ISSN: . (Published) |
SCOPUS |
|
| 28 |
Effendy, M. (2018) Enhancing the Trailing-Edge Cooling Performance of Gas Turbine Blade Using Cylindrical Pin-Fins Cooling, Advanced Science Letters, Vol: 24, 12, 9049-9053, ISSN:1936-7317. (Published) |
Other index |
|
| 29 |
Effendy M., Yao Y., Marchant D.R. (2017) Detached-Eddy Simulation of Trailing-Edge (TE) Cutback Turbine Blade Cooling, MATEC Web of Conferences, Vol: 135, 8, --, ISSN:2261236X. (Published) |
SCOPUS |
|
| 30 |
Supriyono, Effendy M., Wijianto (2017) Material nonlinearity plate bending analysis with boundary element method, AIP Conference Proceedings, Vol: 1855, 30023, --, ISSN:0094243X. (Published) |
SCOPUS |
|
| 31 |
Effendy M., Yao Y.F., Yao J., Marchant D.R. (2016) DES study of blade trailing edge cutback cooling performance with various lip thicknesses, Applied Thermal Engineering, Vol: 99, , 434--445, ISSN:1359-4311. (Published) |
Web of Science (SCIE) |
5.295 2021 |
| 32 |
Effendy M., Yao Y., Yao J., Marchant D.R. (2014) Predicting film cooling performance of trailing-edge cutback turbine blades by detached eddy simulation, 52nd Aerospace Sciences Meeting, Vol: , , --, ISSN: . (Published) |
SCOPUS |
|
| 33 |
Effendy M., Yao Y., Yao J., Marchant D.R. (2014) Predicting film cooling performance of trailing-edge cutback turbine blades by detached eddy simulation, 52nd AIAA Aerospace Sciences Meeting - AIAA Science and Technology Forum and Exposition, SciTech 2014, Vol: , , --, ISSN: . (Published) |
SCOPUS |
|
| 34 |
Effendy M., Yao Y., Yao J. (2013) Comparison study of turbine blade with trailing-edge cutback coolant ejection designs, 51st AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition 2013, Vol: , , --, ISSN: . (Published) |
SCOPUS |
|
| 35 |
Effendy M., Yao Y., Yao J. (2013) Effect of mesh topologies on wall heat transfer and pressure loss prediction of a blade coolant passage, Applied Mechanics and Materials, Vol: 315, , 216--220, ISSN:16609336. (Published) |
SCOPUS |
|
| 36 |
Yao Y., Effendy M., Yao J. (2013) Evaluation of wall heat transfer in blade trailing-edge cooling passage, Applied Mechanics and Materials, Vol: 284-287, , 738--742, ISSN:16609336. (Published) |
SCOPUS |
|
| 37 |
Effendy, M., Yao, Y.F., Yao, J. (2012) Pressure loss and wall heat transfer characteristics in blade trailing-edge cooling passage , Proceedings of the International Symposium on Turbulence, Heat and Mass Transfer , Vol: 2012, , 506-517, ISSN:2377-2816. (Published) |
SCOPUS |
|
Books
Displaying 2 records.| No | Cover book | Book Detail | Involvement |
|---|---|---|---|
| 1 |
|
Standar Penjaminan Mutu Internal (SPMI) Jenjang S2 dan S3 Marwan Effendy
(2021), ISBN:978-602-361-374-8, Muhammadiyah University Press.Language: Bahasa Indonesia purchase link |
Co-author |
| 2 |
|
Pengetahuan Dasar Sistem Kendali Marwan Effendy, PhD.
(2019), ISBN:9786023612161, Muhammadiyah University Press.Language: Bahasa Indonesia purchase link |
First author |
Chapter in Book
No chapter in book records found.
Article in Proceedings
Displaying 2 records.| No | Article in Proceedings | Involvement |
|---|---|---|
| 1 |
Influence of Life Green Wall and Roof Shedding on the Internal Thermal Condition of Buildings: Case Study in Malaysia In Proc.
International Conference on Production, Energy & Reliability (ICPER) (2021), pp.5, ISBN: . |
Co-author |
| 2 |
Pressure loss and wall heat transfer characteristics in blade trailing-edge cooling passage In Proc.
THMT-12. Proceedings of the Seventh International Symposium On Turbulence Heat and Mass Transfer 2012, 24-27 September, Palermo, Italy (2012), pp.506-517, ISBN:978-1-56700-302-4. http://dl.begellhouse.com/references/1bb331655c289a0a,7c69ce3452e09525,59a1d95264ff5222.html |
First author |
Research
Displaying 11 records.| Involvement | Involved as |
|---|---|
| Project leader | 6 |
| Research member | 5 |
| No | Project Title | Start | End | Involvement | Category | Funding |
|---|---|---|---|---|---|---|
| 1 |
[Penelitian Dasar (Kompetitif Nasional) 80.22/A.3-III/LPPM/V/2021] Teknologi Pengolahan Limbah Plastik sebagai Bahan Bakar Alternatif pada Mesin Kendaraan |
18/3/2021 | 31/12/2021 | Project leader |
National |
|
| 2 |
[Penelitian Terapan Perguruan Tinggi 80.15/A.3-III/LPPM/V/2021] Pengembangan Teknologi Pembuatan Bio-Etanol Ramah Lingkungan untuk Substitusi Bahan Bakar Kendaraan Bermotor |
18/3/2021 | 31/12/2021 | Project leader |
National |
|
| 3 |
[Hibah Integrasi Tridharma 2020-2021] Pemanfaatan Limbah sebagai Bahan Bakar Alternatif pada Mesin Kendaraan Bermotor |
1/1/2021 | 31/12/2021 | Project leader |
University |
|
| 4 |
[Penelitian Terapan Ristek Dikti 2018-2020] Multistage Liquid Jet Ejector sebagai Vacuum Pump berbasis pada Energi Terbarukan |
1/1/2018 | 1/12/2020 | Research member |
National |
|
| 5 |
[Penelitian Dasar Unggulan Perguruan Tinggi Ristek Dikti 2018-2020] Optimasi Kinerja Sistem Pendinginan Blade Turbin Gas |
1/1/2018 | 1/12/2020 | Project leader |
National |
|
| 6 |
[Penelitian Tesis Magister Ristek Dikti 2019] OPTIMASI KUALITAS PEMBAKARAN ETANOL DAN BRIKET CHAR PRODUK PIROLISIS LIMBAH PLASTIK SEBAGAI BAHAN BAKAR ALTERNATIF |
1/1/2019 | 1/12/2019 | Project leader |
National |
|
| 7 |
[Penelitian Tesis Magister Ristek Dikti 2019] PENGEMBANGAN MATERIAL DAN COATING DARI BAHAN KOMPOSIT Ni-Al-Ti UNTUK MENINGKATKAN SIFAT KETAHANAN AUS KOMPONEN MESIN |
1/1/2019 | 1/12/2019 | Research member |
National |
|
| 8 |
[PHD 2018] Thermal Comfort in Low Energy Building Supported by Live Green Wall |
1/1/2018 | 1/12/2019 | Research member |
University |
|
| 9 |
[Penelitian Terapan Unggulan Perguruan Tinggi Ristek Dikti 2016-2018] Elastoplastic Boundary Element Method(BEM) untuk Analisa Pembebanan Pelat |
1/1/2016 | 1/12/2018 | Research member |
National |
|
| 10 |
[Hibah Bersaing 2007-2009] Optimasi Sistem Pendingin AC Mobil |
1/12/2007 | 1/12/2009 | Project leader |
National |
|
| 11 |
[Hibah Bersaing 2007-2009] Fenomena Kavitasi pada Pompa |
1/12/2007 | 1/12/2009 | Research member |
National |
Innovation
Displaying 1 records.| No | Type of Innovation and Commercialisation | Year | Description |
|---|---|---|---|
| 1 |
Intelectual Property 000160372 |
2019 |
AppPMB Pasca UMS, Intelectual Property Product, Project Leader, No: 000160372. Marwan Effendy, Triyono, Husni Thamrin, Jumadi, Eka Saputra |
Supervision
Displaying 45 records.| No | Supervision | Student | Status |
|---|---|---|---|
| 1 | Supervisor |
EDY SUSILO WIDODO (U100180009)
Engine Performance
Universitas Muhammadiyah Surakarta (UMS) |
In Progress |
| 2 | Supervisor |
Muayat Khoirun Nafis (U100200002)
Pengaruh Perubahan Lobe Separation Angle (LSA) pada Camshaft Bagi Performa Mesin dan Emisi Gas Buang |
In Progress |
| 3 | Supervisor |
Anton Prihatno (U100190018)
Analisis Pengaruh Variasi Geometri Mahkota Piston terhadap Performa, Konsumsi (Karakteristik Injektor Bekerja) dan Emisi Mesin Pengapian Berbahan Bakar Bensin |
In Progress |
| 4 | Supervisor |
Diyan Wahyudi
Penambahan Bio-Ethanol pada Bahan Bakar Berbasis Fosil terhadap Emisi Gas Buang Kendaraan |
In Progress |
| 5 | Supervisor |
Imam Eko Purwanto (U100170038)
Pirolisis Limbah Plastik Sebagai Bahan Bakar Alternatif
Universitas Muhammadiyah Surakarta (UMS) |
Completed 2022 |
| 6 | Supervisor |
Fadli Rozaq (U100190008)
Investigasi Pengaruh Perlakuan Temperatur Bahan Bakar dan Injeksi Air Terhadap Kinerja Mesin Diesel |
Completed 2022 |
| 7 | Supervisor |
Ata Syifa’ Nugraha (U100200005)
Kinerja Motor Bakar dan Emisi Gas Buang Akibat Perubahan Rasio Kompresi
Universitas Muhammadiyah Surakarta (UMS) |
Completed 2022 |
| 8 | Supervisor |
Hendy Feryyanto (U100180022)
Penambahan Kandungan Bioetanol dari Sari Tebu terhadap Kinerja Motor Otto
Universitas Muhammadiyah Surakarta (UMS) |
Completed 2021 |
| 9 | Supervisor |
Akhmad Sulkhan (U100180020)
Penambahan Kandungan Bioetanol dari Sari Buah Singkong terhadap Kinerja Motor Otto |
Completed 2021 |
| 10 | Supervisor |
Yusufa Imadudin Assaf (U100180013)
Pengaruh Electromagnetic Fuel Saver (EFS) Terhadap Daya,Torsi, Konsusmsi Bahan Bakar, Dan Emisi Gas Buang |
Completed 2021 |
| 11 | Supervisor |
Marsidik Suprihatin (U100160029)
Engine Performance and Emission due to Various Compression Ratios
Universitas Muhammadiyah Surakarta (UMS) |
Completed 2020 |
| 12 | Supervisor |
APRI RAHMADI (U100180006)
Engine Performance
Universitas Muhammadiyah Surakarta (UMS) |
Completed 2020 |
| 13 | Co- Supervisor |
Dhimas Wicaksono (U100170040)
Pengaruh Titanium pada Struktur Mikro dan Sifat Mekanis Komposisi Ni-Al-Ti
Universitas Muhammadiyah Surakarta (UMS) |
Completed 2020 |
| 14 | Co- Supervisor |
Hassan Khamis Hassan (U100170009)
Smart Detection of Exegetic Sun Rays using Arduino for The Performance of Solar Power Systems |
Completed 2019 |
| 15 | Supervisor |
Eqwar Saputra (U100170041)
The use of Mollases Bio-ethanol to Reduce Emission in Combustion Engine
Universitas Muhammadiyah Surakarta (UMS) |
Completed 2019 |
| 16 | Supervisor |
Arif Surono (U100170024)
Recycling of Waste Oil in Diesel Engine
Universitas Muhammadiyah Surakarta (UMS) |
Completed 2019 |
| 17 | Supervisor |
Andi Prasetyo (U100170022)
Investigation of Bio-ethanol for Gasoline Engine
Universitas Muhammadiyah Surakarta (UMS) |
Completed 2019 |
| 18 | Supervisor |
Muhammad Rahmadi (U100160044)
Large Eddy Simulation of Trailing Edge Cooling System
Universitas Muhammadiyah Surakarta (UMS) |
Completed 2019 |
| 19 | Supervisor |
Sunaryo (U100170031)
KONVERSI SAMPAH PLASTIK JENIS LDPE MENJADI BAHAN BAKAR ALTERNATIF PADA KENDARAAN BERMOTOR |
Completed 2019 |
| 20 | Supervisor |
Supriyanto (U100170010)
Aerodynamics Characteristic of Airfoil NACA 4412
Universitas Muhammadiyah Surakarta (UMS) |
Completed 2019 |
| 21 | Co- Supervisor |
Akhmad Nurmuladi (U100150002)
Electroplating
Universitas Muhammadiyah Surakarta (UMS) |
Completed 2019 |
| 22 | Supervisor |
Arif Feriansyah (U100150003)
Studi Eksperimental Reduksi Emisi Gas Buang Kendaraan Bermotor dengan Katalitik Konverter |
Completed 2018 |
| 23 | Supervisor |
Munasir (U100150008)
Studi Eksperimen Kinerja Mesin Pendingin Ruangan (AC Split) pada Penggunaan Refrigeran yang Berbeda (HFC-134a, R-22, R-410a) |
Completed 2018 |
| 24 | Supervisor |
Leo Van Gunawan (U10016018)
Pengaruh Campuran Bioetanol Biji Durian pada Bahan Bakar Pertalite terhadap Performa Mesin dan Emisi Gas Buang Kendaraan |
Completed 2018 |
| 25 | Supervisor |
Agus Jamaldi (U100160039)
Detached Eddy Simulation of Trailing Edge Cooling System
Universitas Muhammadiyah Surakarta (UMS) |
Completed 2018 |
| 26 | Supervisor |
Tindyo Prasetyo (u)
Simulation of Arm Robotic
Universitas Muhammadiyah Surakarta (UMS) |
Completed 2018 |
| 27 | Co- Supervisor |
Joko Suparno (U100160008)
Grafit Sebagai Pelumas Kering untuk Mengurangi Tingkat Keausan Roda Kereta Api
Universitas Muhammadiyah Surakarta (UMS) |
Completed 2017 |
| 28 | Co- Supervisor |
Junaidi (U100160009)
Pengaruh Penggunaan Grafit terhadap Keausan dengan Variasi Kecepatan pada Sistem Kontak Disc on Disc dalam Simulasi Wheel dan Rail |
Completed 2017 |
| 29 | Co- Supervisor |
Dimas Ardiansyah Halim (U100160004 )
PENGARUH DRY LUBRICATION GRAFIT TERHADAP KEAUSAN DENGAN VARIASI TEKANAN PADA SISTEM KONTAK DISC ON DISC WHEEL DRIVE |
Completed 2017 |
| 30 | Co- Supervisor |
Ady Setiawan (U100160012)
RANCANG BANGUN ALAT UJI KEAUSAN BERBASIS SISTEM KONTAK DISC-ON-DISC
Universitas Muhammadiyah Surakarta (UMS) |
Completed 2017 |
| No | Supervision | Student | Status |
|---|---|---|---|
| 1 | Supervisor |
Ari Eko Yulistira (D200140262)
Studi Numerik dan Eksperimen Karakteristik Aerodinamika Airfoil NACA 0015
Universitas Muhammadiyah Surakarta (UMS) |
Completed 2019 |
| 2 | Supervisor |
Akhmad Abdul Azis (D200130029)
Prediksi Karakteristik Temperatur dan Kecepatan Udara Pada Ruangan Berpendingin AC dengan Metode Pendekatan Simulasi |
Completed 2018 |
| 3 | Supervisor |
Bima Priambudi (D2001301013)
ANALISA KARAKTERISTIK TEMPERATUR DAN KECEPATAN UDARA PADA RUANGAN BERPENDINGIN AC DENGAN TURBULENSI MODEL K-OMEGA STANDAR DAN K-OMEGA SST |
Completed 2018 |
| 4 | Supervisor |
Eqwar Saputra (D200130144)
Kinerja Air Conditioning
Universitas Muhammadiyah Surakarta (UMS) |
Completed 2018 |
| 5 | Supervisor |
Heru Andiyanto (D200130016)
Karakteristik Perpindahan Panas dan Evaluasi Kondisi Kenyamanan Udara pada Ruang ber-AC |
Completed 2017 |
| 6 | Supervisor |
Edi Supriyanto (D200130119)
Simulasi Distribusi Temperatur Ruangan Ber-AC pada Berbagai Perubahan Temperatur di Sekitar Evaporator |
Completed 2017 |
| 7 | Supervisor |
Unggul Adi Pamungkas (D200130088)
Karakteristik Temperatur dan Kecepatan Udara pada Ruangan Untuk Kenyamanan Termal Dengan Variasi Kecepatan Udara |
Completed 2017 |
| 8 | Supervisor |
BAGUS NUGROHO (D200130181)
KARAKTERISTIK DISTRIBUSI TEMPERATUR DAN POLA ALIRAN UDARA DALAM RUANGAN DENGAN SATU UNIT AC TIPE SPLIT DENGAN VARIASI KECEPATAN UDARA INLET MENGGUNAKAN METODE CFD |
Completed 2017 |
| 9 | Supervisor |
Rasyid Azzamudin (D200130120)
ANALISISDISTRIBUSIALIRAN UDARA PADA RUANGANDENGAN VARIABEL TEMPERATUR DAN PENEMPATANAC |
Completed 2017 |
| 10 | Supervisor |
Ekno Saputro (U)
A CFD PREDICTION OF HEAT TRANSFER COEFFICIENT AND FRICTION FACTOR OF THE ELLIPTICAL PIN-FIN COOLING WITH STAGGERED ORIENTATION |
Completed 2017 |
| 11 | Supervisor |
Adnan Arif Faishal (D200110079)
Karakteristik Perpindahan Panas dan Penurunan Tekanan Pin Fin Cooling Susunan Segaris Segaris Pada Trailing Edges Sudu Turbin Gas |
Completed 2016 |
| 12 | Supervisor |
Endri Susanto (D200110061)
Karakteristik Perpindahan Panas dan Penurunan Tekanan Sistem Pendingin Sirip “Diamond” pada Trailing Edge Sudu Turbin Gas |
Completed 2016 |
| 13 | Supervisor |
Punto Baskoro (D200110054)
KARAKTERISTIK PERPINDAHAN PANAS DAN PENURUNAN TEKANAN PIN FIN OBLONG INOVATIF PADA TRAILING EDGE BLADETURBIN GAS |
Completed 2016 |
| 14 | Supervisor |
MUKHRON MARDLONI (D200110013)
KARAKTERISTIK PERPINDAHAN PANAS DAN PENURUNAN TEKANAN PIN-FINELLIPS SUSUNAN SEGARIS UNTUK SISTEM PENDINGIN INTERNALPADA SUDU TURBIN GAS |
Completed 2016 |
| 15 | Supervisor |
Syafrudin (D20080086)
STUDI KARAKTERISTIK PERPINDAHAN PANAS SIRIP-SIRIP PIN ELLIPSSUSUNANSELANG-SELING DENGAN PENDEKATAN CFD |
Completed 2016 |
Awards
Displaying 2 results.| No | Achievement Information | Category | Year |
|---|---|---|---|
| 1 |
The 5th International Conference on Engineering, Technology, and Industrial Application
Project leader Numerical study of pin-fin cooling on gas turbine blades
Best presenter
|
International | 2018 |
| No | Achievement Information | Category | Year |
|---|---|---|---|
| 1 |
Best UMS lecturer in 2007
|
University | 2007 |
Management
Displaying 7 records| No | Assignment Post | Assignment Information |
|---|---|---|
| 1 | Vice Director, Postgraduate Programme | Vice Director, Postgraduate Programme , (1/8/2017 - Current ) |
| 2 | Head of Department, Master of Mechanical Engineering | Head of Department, Master of Mechanical Engineering , (1/8/2015 - Date 1/8/2017) |
| 3 | Head of Department, | Head of Department, Mechanical Engineering (International Program), (1/2/2015 - Date 1/8/2015) |
| 4 | Head of Department, Mechanical Engineering | Head of Department, Mechanical Engineering , (1/7/2004 - Date 1/7/2009) |
| 5 | Head of Laboratory, | Head of Laboratory, CAD/CAM/CAE, (1/8/2003 - Date 1/7/2004) |
| 6 | Head of Implementation Unit, | Head of Implementation Unit, TPSDP Project, (1/8/2002 - Date 1/8/2003) |
| 7 | Secretary of Department, | Secretary of Department, Mechanical Engineering, (1/8/1999 - Date 1/8/2000) |
Other Assignments
Displaying 53 records| No | Assignment | Description |
|---|---|---|
| 1 | Journal Reviewer |
Walailak Journal of Science and Technology ,
(1/8/2021 - Current )
|
| No | Assignment | Description |
|---|---|---|
| 1 | Master or PhD Examiner |
Master - Luthfi Ady Haryoko 17006010
Sem 1 2020-2021 ,
(7/7/2021 - Current )
|
| No | Assignment | Description |
|---|---|---|
| 1 | Journal Reviewer |
International Journal of Automotive And Mechanical Engineering (IJAME) ,
(1/1/2021 - Current )
|
| 2 | Journal Reviewer |
International Journal of Engineering Technology and Sciences (IJETS) ,
(5/11/2020 - Current )
|
| No | Assignment | Description |
|---|---|---|
| 1 | Narasumber |
Sentences and Tenses in Research Articles
,
(1/9/2022 - Date 2/9/2022)
|
| No | Assignment | Description |
|---|---|---|
| 1 | Narasumber |
Workshop Penulisan Artikel Ilmiah berbasis Riset
,
(12/1/2023 - Date 13/1/2023)
|
| No | Assignment | Description |
|---|---|---|
| 1 | Master or PhD Examiner |
PhD - R Lullus Lambang G Hidayat T7620002004
Sem 2 2021-2022 ,
(7/2/2022 - Current )
|
| 2 | Master or PhD Examiner |
PhD - Purwadi Joko Widodo T761908001
Sem 2 2022-2023 ,
(1/2/2023 - Current )
|
| No | Assignment | Description |
|---|---|---|
| 1 | Narasumber |
Workshop Strategi Menembus High Impact Factor Journals
,
(28/12/2021 - Current )
|
| No | Assignment | Description |
|---|---|---|
| 1 | A-half-day Workshop on How to Get Published in International Journal |
Organised by Master Program of Psychology at Graduate School UMS Indonesia
,
(6/7/2020 - Date 6/7/2020)
|
| 2 | A-half-day Workshop on How to Prepare Manuscripts for International Journal |
Organised by Master Program of Mechanical Engineering at Post-Graduate School UMS Indonesia
,
(20/12/2019 - Date 20/12/2019)
|
| 3 | Conference Technical Committee |
The 6th International Conference on Engineering, Technology, and Industrial Application Alila Hotel Solo ,
(12/12/2019 - Date 13/12/2019)
|
| 4 | One-day workshop on How to Write a Research Article |
Organised by Doctoral Program of Islamic Studies at Syariah Hotel Solo Indonesia
,
(10/12/2019 - Date 10/12/2019)
|
| 5 | Workshop Strategi Menulis Artikel dan Publikasi Internasional |
Organised by Graduate School UMS Indonesia
,
(22/11/2019 - Date 22/11/2019)
|
| 6 | Conference Technical Committee |
The 2nd International Conference on Advanced Materials Science Sekolah Pascasarjana Univ. Muhammadiyah Surakarta ,
(23/10/2019 - Date 24/10/2019)
|
| 7 | One-day workshop on How to Write a Great Manuscript |
Organised by Department of Mechanical Engineering at Syariah Hotel Solo Indonesia
,
(3/10/2019 - Date 3/10/2019)
|
| 8 | Workshop on How to Prepare Manuscripts for Submission to Conference and Journal |
Organised by Graduate School of UMS Indonesia
,
(5/4/2019 - Date 5/4/2019)
|
| 9 | Conference Paper Reviewer |
The 5th International Conference on Engineering, Technology, and Industrial Application Alila Hotel Solo ,
(12/12/2018 - Date 13/12/2018)
|
| 10 | Conference Paper Reviewer |
The 4th International Conference on Engineering, Technology, and Industrial Application Alila Hotel Solo ,
(13/12/2017 - Date 14/12/2017)
|
| No | Assignment | Description |
|---|---|---|
| 1 | Narasumber |
Riset berbasis Eksperimen
,
(30/12/2021 - Current )
|
| No | Assignment | Description |
|---|---|---|
| 1 | Narasumber |
Workshop Strategi Menembus Jurnal Internasional Bereputasi
,
(29/12/2021 - Current )
|
| 2 | Visiting Lecture - Strategi Sukses Belajar |
,
(21/10/2020 - Date 21/10/2020)
|
| 3 | Narasumber Workshop Penyusunan Kurikulum Prodi Teknik Mesin |
,
(15/8/2017 - Date 15/8/2017)
|
| No | Assignment | Description |
|---|---|---|
| 1 | Conference Keynote Speaker |
National Seminar https://lppm.ump.ac.id/index.php/berita/369-semnaslppm ,
(4/12/2021 - Current )
|
| 2 | Narasumber |
Workshop Penulisan Artikel Ilmiah
,
(4/12/2021 - Current )
|
| 3 | Narasumber |
Workshop Pengembangan Kurikulum Outcomes based Education
,
(28/5/2021 - Date 29/5/2021)
|
| 4 | Narasumber |
Workshop Penyusunan Kurikulum Program Studi Teknik Mesin
,
(30/1/2020 - Date 31/1/2020)
|
| No | Assignment | Description |
|---|---|---|
| 1 | Narasumber |
Narasumber Pengembangan Kurikulum Berbasis OBE dan MBKM
,
(1/7/2021 - Current )
|
| No | Assignment | Description |
|---|---|---|
| 1 | Workshop dan Klinik |
Strategi Menembus Publikasi pada Jurnal Internasional
,
(24/1/2020 - Date 25/1/2020)
|
| No | Assignment | Description |
|---|---|---|
| 1 | Master or PhD Examiner |
PhD - Nurfa Anisa 157060200111003
Sem 2 2021-2022 ,
(31/8/2022 - Current )
|
| 2 | Master or PhD Examiner |
PhD - Ely Setyo Astuti 177060200111002
Sem 2 2022-2023 ,
(11/1/2023 - Current )
|
| No | Assignment | Description |
|---|---|---|
| 1 | Conference Track Director |
International Conference on Engineering Application, Physics and Sciences (ICEAPS2017) Johor Bahru, Malaysia ,
(26/7/2017 - Date 27/7/2017)
|
| No | Assignment | Description |
|---|---|---|
| 1 | Journal Reviewer |
Research on Engineering Structures and Materials ,
(1/2/2022 - Current )
|
| No | Assignment | Description |
|---|---|---|
| 1 | Journal Reviewer |
Sustainability ,
(1/12/2021 - Current )
|
| 2 | Journal Reviewer |
Energies ,
(7/1/2022 - Current )
|
| 3 | Journal Reviewer |
Hydrogen ,
(1/9/2022 - Current )
|
| 4 | Journal Reviewer |
Buildings ,
(5/8/2022 - Current )
|
| 5 | Journal Reviewer |
Processes ,
(7/9/2022 - Current )
|
| 6 | Journal Reviewer |
Atmosphere ,
(4/7/2022 - Current )
|
| 7 | Journal Reviewer |
Materials ,
(10/7/2022 - Current )
|
| No | Assignment | Description |
|---|---|---|
| 1 | Journal Reviewer |
Journal of Engineering Research ,
(11/6/2020 - Current )
|
| No | Assignment | Description |
|---|---|---|
| 1 | Journal Reviewer |
IIUM Engineering Journal ,
(1/1/2020 - Current )
|
| No | Assignment | Description |
|---|---|---|
| 1 | Workshop dan Klinik |
Penulisan Artikel Publikasi Ilmiah Internasional
,
(15/1/2020 - Date 15/1/2020)
|
| No | Assignment | Description |
|---|---|---|
| 1 | Journal Reviewer |
International Journal of Heat and Mass Transfer ,
(1/12/2018 - Current )
|
| 2 | Journal Reviewer |
Building and Environment ,
(1/11/2021 - Current )
|
| 3 | Journal Reviewer |
Heliyon ,
(1/3/2022 - Current )
|
| 4 | Journal Reviewer |
Applied Mathematics and Computation ,
(1/7/2021 - Current )
|
| 5 | Journal Reviewer |
Case studies in Thermal Engineering ,
(12/11/2022 - Current )
|
| No | Assignment | Description |
|---|---|---|
| 1 | Journal Editor |
International Journal of Theoretical and Applied Multiscale Mechanics ,
(12/10/2017 - Current )
|
| 2 | Journal Editor |
Applied Research and Smart Technology (ARSTech) ,
(1/2/2020 - Current )
|
| 3 | Journal Editor |
Creative Research in Engineering (CERIE) ,
(1/1/2021 - Current )
|
| No | Assignment | Description |
|---|---|---|
| 1 | Speaker |
A-half-day Workshop on How to Prepare a Publishable Paper
,
(26/10/2019 - Date 26/10/2019)
|
| No | Assignment | Description |
|---|---|---|
| 1 | Journal Reviewer |
Journal of Aerospace Engineering ,
(1/3/2019 - Current )
|
Attended Courses
Displaying 36 records.| No | Course Information | Duration |
|---|---|---|
| 1 |
Scholarly Journal Writing WorkshopUniversiti Malaysia Perlis
Kampus Alam Pauh Putra 02600 Arau Perlis Malaysia(How to write a publishable paper)
|
28/10/2019 - 31/10/2019 |
| 2 |
Penulisan Artikel Ilmiah Internasional Universitas Muhammadiyah Surakarta
Jl. Ahmad Yani Tromol Pos I Pabelan Kartasura Surakarta Indonesia
|
14/10/2019 - 15/10/2019 |
| 3 |
Pelatihan Audit Mutu Internal Universitas Muhammadiyah Surakarta
Jl. Ahmad Yani Tromol Pos I Pabelan Kartasura Surakarta Indonesia(Penjaminan Mutu Pengelolaan Pendidikan Tinggi)
|
29/1/2019 - 31/1/2019 |
| 4 |
Best Practices Workshop for Postgraduate SupervisionUniversiti Tun Hussein Onn Malaysia
Universiti Tun Hussein Onn Malaysia (UTHM) (How to supervise a PhD student program)
86400 Parit Raja, Batu Pahat, Johor, Malaysia |
24/5/2017 - 25/5/2017 |
| 5 |
Peningkatan Mutu Dosen dalam Penyusunan Proposal Program RisetTerapanDirektorat Riset & Pengabdian Kemenristekdikti
Gedung B.J. Habibie Lantai 15-24, Jl. M.H. Thamrin No. 8, (-)
Jakarta Pusat 10340 |
18/4/2016 - 19/4/2016 |
| 6 |
International Office MeetingUniversitas Airlangga
Jl. Airlangga No.4 - 6, Airlangga, Kec. Gubeng, Kota SBY, Jawa Timur 60115(International Office Collaboration)
|
11/1/2015 - 12/1/2015 |
| 7 |
Communication Skills Kingston University London
55-59 Penrhyn Rd, Kingston upon Thames KT1 2EE, United Kingdom(Communication Skills)
Mentor name: Kathryn Richardson |
1/11/2010 - 30/12/2010 |
| 8 |
Applied Approach Program Universitas Sebelas Maret
Jl. Ir. Sutami No.36, Kentingan, Kec. Jebres, Kota Surakarta, Jawa Tengah 57126(How to write a book)
|
12/4/2010 - 15/4/2010 |
| 9 |
Fundamental of Manuscript Preparation ELSEVIER - Researcher Academy, Amsterdam, Netherlands
Elsevier B.V. Registered Office: Radarweg 29, 1043 NX Amsterdam(Learn how reference managers can make your research life simpler while helping you make the most of your data.
)
|
18/10/2020 - |
| 10 |
Certified Peer Reviewer Course ELSEVIER - Researcher Academy, Amsterdam, Netherlands
Elsevier B.V. Registered Office: Radarweg 29, 1043 NX Amsterdam(Peer review is an essential part of publishing review articles, just like it is for research articles. Probably the most important part of the peer review process, this section digs deep into what it takes to write a peer review report, which will be helpful to the author and ultimately to science.)
|
19/10/2020 - |
| 11 |
Becoming a peer reviewer ELSEVIER - Researcher Academy, Amsterdam, Netherlands
Elsevier B.V. Registered Office: Radarweg 29, 1043 NX Amsterdam(Peer review is a skill, and in this series of modules, we share some tips to help you deliver review reports guaranteed to make any editor smile)
|
21/10/2020 - |
| 12 |
Going Through Peer Review ELSEVIER - Researcher Academy, Amsterdam, Netherlands
Elsevier B.V. Registered Office: Radarweg 29, 1043 NX Amsterdam(When you’ve already invested so much time in your manuscript, it’s not always easy to hear that a reviewer thinks it needs more work. In these modules include "How to respond to reviewers' comments" and "How do editors look at your paper?")
|
21/10/2020 - |
| 13 |
Fundamental of peer review ELSEVIER - Researcher Academy, Amsterdam, Netherlands
Elsevier B.V. Registered Office: Radarweg 29, 1043 NX Amsterdam(Peer review is the cornerstone of the scientific publishing process, yet editors face a daily struggle to find researchers willing to review for their journal.)
|
20/10/2020 - |
| 14 |
Book Writing ELSEVIER - Researcher Academy, Amsterdam, Netherlands
Elsevier B.V. Registered Office: Radarweg 29, 1043 NX Amsterdam(Becoming a book author or editor can be a useful career move and help position you as an expert in your field. In this series of book writing modules, we explore the various ways you can become involved in book publishing and what you should consider before taking that step.)
|
22/10/2020 - |
| 15 |
Writing Skills ELSEVIER - Researcher Academy, Amsterdam, Netherlands
Elsevier B.V. Registered Office: Radarweg 29, 1043 NX Amsterdam(No matter how novel your research, or how much time you’ve invested in your work, you still need to pay attention to some basic writing rules if you want to get published)
|
23/10/2020 - |
| 16 |
Fundamental of Publishing ELSEVIER - Researcher Academy, Amsterdam, Netherlands
Elsevier B.V. Registered Office: Radarweg 29, 1043 NX Amsterdam(You are probably familiar with the saying “publish or perish”. To ensure your publishing career thrives, we recommend investing a little time in understanding how the process works.)
|
24/10/2020 - |
| 17 |
Ethics on publication ELSEVIER - Researcher Academy, Amsterdam, Netherlands
Registered Office: Radarweg 29, 1043 NX Amsterdam, The Netherlands(Breaking the publishing ethics rules can badly damage your reputation as a researcher, and even spell the end of your career. In this module series, we provide you with the support and advice you need to ensure your manuscript and actions are ethically sound.)
|
25/10/2020 - |
| 18 |
Finding the right journal ELSEVIER - Researcher Academy, Amsterdam, Netherlands
Registered Office: Radarweg 29, 1043 NX Amsterdam, The Netherlands(If you want to get your paper published, one of the key challenges you face is finding the right journal for your research. From the aims and scope, to the journal’s values and ethical practice, there are many points to take into account. )
|
26/10/2020 - |
| 19 |
Technical writing skills ELSEVIER - Researcher Academy, Amsterdam, Netherlands
Radarweg 29, 1043 NX Amsterdam(Depending on your field of study, there are different types of articles and formats you’ll need to master. The LaTeX typesetting system, for example, has proven to be a powerful tool for researchers in fields where tables, figures, and formulae are regular manuscript features. Like any technology, there are tips and tricks that can make it easier to use. In this beginners’ guide, we walk you through them.)
|
2/11/2020 - |
| 20 |
Researcher online Forum : Publishing in Southeast AsiaSpringer Nature
152 Beach Road, #21-04 Gateway East, Singapore 189721(Researcher online Forum : Publishing in Southeast Asia)
|
16/6/2020 - |
| 21 |
Open ScienceELSEVIER - Researcher Academy, Amsterdam, Netherlands
Radarweg 29, 1043 NX Amsterdam, The Netherlands(Open science is the new buzzword. Understand how open access publishing works and how you can publish open access.)
|
4/11/2020 - |
| 22 |
Ensuring visibility ELSEVIER - Researcher Academy, Amsterdam, Netherlands
Radarweg 29, 1043 NX Amsterdam(With so much new research published each year, it’s never been more important to actively promote your paper. In this series of modules, we share some useful tips to help you increase the visibility of your work.)
|
5/11/2020 - |
| 23 |
Succesful Research Grant Applications ELSEVIER - Researcher Academy
Radarweg 29, 1043 NX Amsterdam, The Netherlands(A comprehensive guide to scholarly metrics and practical tips to help you leverage them when building networks or applying for funding.
)
|
10/11/2020 - |
| 24 |
Research Collaborations ELSEVIER - Researcher Academy
Radarweg 29, 1043 NX Amsterdam, The Netherlands(Academic collaborations with researchers from varying backgrounds can act as a conduit to innovative ideas and solutions)
|
12/11/2020 - |
| 25 |
Research Data Management ELSEVIER - Researcher Academy
Radarweg 29, 1043 NX Amsterdam, The Netherlands(The need for sharing data today expands beyond its purpose of promoting transparency and reproducibility.
)
|
14/11/2020 - |
| 26 |
Publishing in the Chemical Sciences ELSEVIER - Researcher Academy
Radarweg 29, 1043 NX Amsterdam, The Netherlands(The publication process isn’t easy, whatever your discipline. In this series of modules we turn the spotlight on getting published in the Chemical Sciences. You will hear from several experts in the field who talk openly about their own experiences.)
|
9/11/2020 - |
| 27 |
Social Impact ELSEVIER - Researcher Academy
Radarweg 29, 1043 NX Amsterdam, The Netherlands(Journal articles are written with researchers in mind, so the content isn’t always easy to follow for people outside academia)
|
6/11/2020 - |
| 28 |
Sustainable Development Goals for Researchers ELSEVIER - Researcher Academy
Radarweg 29, 1043 NX Amsterdam, The Netherlands(As authors, researchers and scientists we have a responsibility towards advancing science while advancing society. By finding ways and knowing how your work can directly support the fulfillment of the Sustainable Development Goals.)
|
7/11/2020 - |
| 29 |
Nusantara Partner MeetingInternational Islamic University Malaysia
Jalan Gombak, 53100, Selangor, Malaysia(Nusantara Collaboration)
|
11/6/2015 - |
| 30 |
Pembekalan Asesor Beban Kinerja DosenKopertis Wilayah 6 Jawa Tengah
Jalan Pawiyatan Luhur I No.1, Bendan Duwur, Gajahmungkur, Bendan Duwur, Kec. Gajahmungkur, Kota Semarang, Jawa Tengah 50233
|
1/2/2019 - |
| 31 |
Pelatihan Reviewer Karya Ilmiah Ajuan Jabatan Fungsional Dosen Universitas Muhammadiyah Surakarta
Jl. Ahmad Yani, Tromol Pos I, Pabelan, Kec. Kartasura, Kabupaten Sukoharjo, Jawa Tengah 57162
|
15/8/2020 - |
| 32 |
Step-by-step Guide on How to Prepare a Successful PaperNature Springer
Nature Publishing Group UK(Research papers are complex and time-consuming assignments. Writing for peer-reviewed publications is an important part of the career of researchers and scientists. However, research students and early-career scientists often face difficulties in publishing their research papers.)
|
22/2/2021 - |
| 33 |
How to write a scientific abstractJohn Wiley & Sons Pte Ltd
Fusionopolis Walk, #07-01 Solaris South Tower,Singapore(An abstract is a written statement that summarizes the main findings of a study) |
18/8/2021 - |
| 34 |
How to write a scientific articleRISTEK-BRIN
Kemenristek/BRIN(Successful production of a written product for submission to a peer‐reviewed scientific journal requires substantial effort)
|
7/9/2020 - |
| 35 |
How to Write & Get PublishedNature Springer
Springer-Verlag GmbH Heidelberg, Tiergartenstrasse 17, 69121 Heidelberg, Germany(How to Write & Get Published in High Impact Factor Journals)
|
14/9/2021 - |
| 36 |
How to prepare manuscripts to WileyWiley-Blackwell
Wiley Services Singapore Pte. Ltd(Tools to support authors submitting their manuscripts to Wiley)
|
14/9/2021 - |
Teaching Experience
Displaying 8 records| No | Session | Course | |
|---|---|---|---|
| 1 | Master by Course (S2) | Sem 3 2015-2023 |
Simposium and Publication (30110101) |
| 2 | Master by Course (S2) | Sem 2 2015-2023 |
Vehicle Engineering and Technology (20110103) |
| 3 | Master by Course (S2) | Sem 1 2015-2023 |
Research Methodology (10110503) |
| 4 | Bachelor (S1) | Sem 2 1996-2023 |
Vibrations (MEN60732) |
| 5 | Bachelor (S1) | Sem 2 1996-2023 |
Refrigeration and Air Conditioning (MEN70443) |
| 6 | Bachelor (S1) | Sem 2 1996-2023 |
Engine Performance Lab Work (MEN70123) |
| 7 | Bachelor (S1) | Sem 2 1996-2023 |
Hydrodynamics Lab. Work (MEN60142) |
| 8 | Bachelor (S1) | Sem 1 1996-2023 |
Control System and Automation (MEN50432) |